Needs help deleting AC2 DN

[bulakeno]

Hi,

I have a DN in my option 11 system that I need to use as a distant steering code but not sure how to delete it. I print the dn in LD 20 and below is the output.

DN 88
TYPE NARS
NTBL AC2

I tried looking for it in LD 90, AC1, AC@, NPA, NXX, SPN and it did not show extension 88.

I tried printing SUM in 90 and below is the output
REQ prt
CUST 0
FEAT net
TRAN sum



NETWORK TRANSLATION TABLES (SUMMARY)


NETWORK TRANSLATOR 1
AC1 9

TRANSLATION CODES

LOC 0
NPA 0
NXX 0
SPN 19
HNPA 0
HLOC 0
NSCC 0

SUPP DIGIT RESTRICTION/RECOGNITION &
INCOMING TRUNK GROUP EXCLUSION

LOC 0
NPA 0
NXX 0
SPN 0


NETWORK TRANSLATOR 2
AC2 88

TRANSLATION CODES

LOC 0
NPA 99
NXX 0
SPN 2
HNPA 0
HLOC 0
NSCC 0

It shows as Network Translator 2, AC2 88 in the printout, I need help to remove 88 from the system and add a distant steering code 8845776, a code that we use globally to dial to one of our sites.

Thanks.

 

[fallenangel1]

I think u can still do it.. by creating LOC 4577 or u can try changing AC2 to something like 777 and then back to 884, then create LOC 5776. (rough idea)

Go For It Even If It's Impossible !

 

[bulakeno]

Can you please guide me in the right direction on how to do that. Is it in LD 90 ? I tried TRAN AC2, tried type SPN, NPA and NXX but cannot find 88, so I cannot make changes to it.

 

[Firebird Scrambler]

Try this..

>ld 86
REQ prt
CUST 0
FEAT esn

MXLC 20
MXSD 20
MXIX 0
MXDM 20
MXRL 20
MXFC 0
MXFS 0
MXSC 20
NCDP 7
AC1 9 ############ Current AC1 and AC2 for Customer 0
AC2
DLTN YES
ERWT YES
ERDT 6
TODS 0 00 00 23 59
RTCL DIS
NCOS 0 - 0
NCOS 1 - 0
NCOS 2 - 0
NCOS 3 - 0
NCOS 4 - 0
NCOS 5 - 0
NCOS 6 - 0
NCOS 7 - 0
NCOS 8 - 0
NCOS 9 - 0
NCOS 10 - 0
NCOS 11 - 0
NCOS 12 - 0
NCOS 13 - 0
NCOS 14 - 0
NCOS 15 - 0
NCOS 16 - 0
NCOS 17 - 0
NCOS 18 - 0
NCOS 19 - 0
NCOS 20 - 0
NCOS 21 - 0
NCOS 22 - 0
NCOS 23 - 0
NCOS 24 - 0
NCOS 25 - 0
NCOS 26 - 0
NCOS 27 - 0
NCOS 28 - 0
NCOS 29 - 0
NCOS 30 - 0
NCOS 31 - 0
NCOS 32 - 0
NCOS 33 - 0
NCOS 34 - 0
NCOS 35 - 0
NCOS 36 - 0
NCOS 37 - 0
NCOS 38 - 0
NCOS 39 - 0
NCOS 40 - 0
NCOS 41 - 0
NCOS 42 - 0
NCOS 43 - 0
NCOS 44 - 0
NCOS 45 - 0
NCOS 46 - 0
NCOS 47 - 0
NCOS 48 - 0
NCOS 49 - 0
NCOS 50 - 0
NCOS 51 - 0
NCOS 52 - 0
NCOS 53 - 0
NCOS 54 - 0
NCOS 55 - 0
NCOS 56 - 0
NCOS 57 - 0
NCOS 58 - 0
NCOS 59 - 0
NCOS 60 - 0
NCOS 61 - 0
NCOS 62 - 0
NCOS 63 - 0
NCOS 64 - 0
NCOS 65 - 0
NCOS 66 - 0
NCOS 67 - 0
NCOS 68 - 0
NCOS 69 - 0
NCOS 70 - 0
NCOS 71 - 0
NCOS 72 - 0
NCOS 73 - 0
NCOS 74 - 0
NCOS 75 - 0
NCOS 76 - 0
NCOS 77 - 0
NCOS 78 - 0
NCOS 79 - 0
NCOS 80 - 0
NCOS 81 - 0
NCOS 82 - 0
NCOS 83 - 0
NCOS 84 - 0
NCOS 85 - 0
NCOS 86 - 0
NCOS 87 - 0
NCOS 88 - 0
NCOS 89 - 0
NCOS 90 - 0
NCOS 91 - 0
NCOS 92 - 0
NCOS 93 - 0
NCOS 94 - 0
NCOS 95 - 0
NCOS 96 - 0
NCOS 97 - 0
NCOS 98 - 0
NCOS 99 - 0
ETOD
TGAR NO


REQ chg
CUST 0
FEAT esn
MXLC
MXSD
MXIX
MXDM
MXRL
MXFC
MXFS
CDP
MXSC
NCDP
AC1
AC2 ############# (Enter in new AC2 value i.e. 8888 etc


All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[bigindian65]

you can not delete AC1/2 only chg them. ld 86 ESN (prt it first, then chg)

Mato' Was'aka

 

[bulakeno]

Thanks for your help.