Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Need VPN Client for Netgear FVM318??
- Thread starter djtech2k
- Start date
Check the FVS318 and W2K thread in the VPN forum for a posting of the version 9 Safenet client when they gave it away for personal use. It works with the FVS318 and should with the FVM as the settings are identical although I have not had the courage to spend the money on the faster, better..hehe...FVM318. I only say that because the FVS318 is a pain in the a$$ to get up and running and I expect the FVM would be no better.
Do you have one? Does the encryption co-proc work as well as the specs suggest or have you had a chance to test it? I have considered it because the FVS318 high encryption throughput is pretty low.
Do you have one? Does the encryption co-proc work as well as the specs suggest or have you had a chance to test it? I have considered it because the FVS318 high encryption throughput is pretty low.
djteck2k
Got a FVM318 and it works fine with the Safenet remote ver9 software I mentioned before although that software does not support the AES encryption.
Also the FVM that I got has a coupon to buy SoftremoteLT for $99 US.
Some people have been successful with the Netscreen client. I have not seen it but it is supposed to be much less expensive. LOL
Got a FVM318 and it works fine with the Safenet remote ver9 software I mentioned before although that software does not support the AES encryption.
Also the FVM that I got has a coupon to buy SoftremoteLT for $99 US.
Some people have been successful with the Netscreen client. I have not seen it but it is supposed to be much less expensive. LOL
- Status
Similar threads
- Locked
- Question