Need to speed up server response or access response

[kbsci]

We are on an NT 4.0 server, connected to a unix server.&nbsp;&nbsp;We are currently running T10.&nbsp;&nbsp;I've been told T100 will greatly increase our speed.&nbsp;&nbsp;I need to know all info about this type of upgrade.&nbsp;&nbsp;<br><br>

 

[Zelandakh]

Do you mean your network card is 10BaseT and you want to replace it with a 100BaseT card?

 

[kbsci]

Yes.&nbsp;&nbsp;That is correct.&nbsp;&nbsp;Will this do anything for speed?&nbsp;&nbsp;Maybe this will help.&nbsp;&nbsp;There are times (not always) that we bog down.&nbsp;&nbsp;We input information, lets say a simple item number lookup, hit the enter key to begin the look-up, and it will take 2 minutes to respond.&nbsp;&nbsp;Usually that type of look-up takes 5 - 10 seconds.

 

[theripper]

kbsci-<br><br>Are you running hubs or switches?&nbsp;&nbsp;Are they 10 or 10/100?<br><br>I would suggest to make sure your network can handle 10/100 first.&nbsp;&nbsp;No need to upgrade one card if everything else is slow.&nbsp;&nbsp;By default, your new 10/100 card would drop right back to where ya came from (T10).<br><br>Hope this helps.