I am capturing information from a pbx unit that sends reports once every hour. What I would like to do is create a script that would start the capture at 6:00 am and close the capture at 6:00pm, then save it to a directory on the network with the file name being the current date.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Need to save captured data by date
- Thread starter sals95
- Start date
If you look in the Samples\ASPECT\Capture Scripts directory on your 4.8 CD, there is a script called 24HourCapture.was that you should be able to modify to do this (minus the naming of the file). The ScheduledCapture.was file in the same directory also does a similar task and performs the file naming.
I also have a sample script on my site that creates a filename in the format YYYYMMDD.TXT if the sample scripts mentioned above aren't sufficient.
aspect@aspectscripting.com
I also have a sample script on my site that creates a filename in the format YYYYMMDD.TXT if the sample scripts mentioned above aren't sufficient.
aspect@aspectscripting.com
Hello,
I have a Script that Monitors a Nortel DMS 100 Logging Channel. The Script Activates every Hour and Half Hour if I remember Correctly. All Data is Saved in a Common File on the PC; but could be modified for a Network Drive. Drop me a Line if you would like a Copy.
Hank
camphm@bellsouth.net
I have a Script that Monitors a Nortel DMS 100 Logging Channel. The Script Activates every Hour and Half Hour if I remember Correctly. All Data is Saved in a Common File on the PC; but could be modified for a Network Drive. Drop me a Line if you would like a Copy.
Hank
camphm@bellsouth.net
- Status