Need to move a DN ASAP

[rogerO73]

I've never used a NOrtel system before but some how ended up having to move a set from one office to another (you know the ext is on all the preprinted buisness cards)--I don't have access to the wire closet to swap Xconnects so how do i do it with the BCM--605 is moving to 608' room so 608 needs to become 605, but I still need to keep 608

Thanks

 

[senk1s]

you can do a DN change
or turn on set relocation, wait a few minutes and swap the phones and then turn it off
or get a vendor to do it for you

 

[rogerO73]

I also need to ask how do I enable set relocation

Thanks

 

[senk1s]

it is one of the parameters under feature settings

if you need navigation help - look at teh manuals on hte BCM itself