Need to know how to find out Option of a Meridian 1 1

[captainnapalmse]

Hi,

We have a Nortel Networks Meridian 1 switch installed here which we inherited with the building about 4 years ago. We have some basic knowledge about how to operate it (programming phone and the like), but we can't figure out what option this thing is. Is there a way to figure out what we've got here? I can't find anything on the switch casing, power supply, or anything else.

Any information would be greatly appreciated.

Scott aka captainnapalmse

 

[ArchibaldJCox]

Log into the PBX

Enter LD 22

use the TID command

>LOGI
PASS?
TTY #01 LOGGED IN 10:35  18/0/0

>LD 22
PT2000
MARP NOT ACTIVATED


REQ  ISS

VERSION 1511
RELEASE 21
ISSUE 8


REQ  ****
>
OVL000
>LOGO
TTY #01 LOGGED OUT 10:35  18/0/0
SESSION DURATION:  00:00

>

In the above scenario the 15 of the VERSION 1511 tells me that the switch is an Option 21.

2111 = Option 11
1111 = Option 51 or 61 (Option 51 will have one core, 61 will have 2 cores)
1811, 2311, 2511, 2911, 3211 = Option 61 or Option 61C (61C will have two Core/Net modules, part number NT5D21, NT9D11, or NT4N41)
1611, 1911, 2611, 3011, 3311 = Option 81 or Option 81C (81C will have a Core/Net module, part number NT5D21 or NT4N41)

Those are some of the common numbers. You can always post your findings back up here.

Arch

------

http://www.infoplusonline.com

Site Surveys
SourceBooks
Security Audits
Traffic Studies
Remote PBX Backups