Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need to enable Ext. Series 3xx MD110

Status
Not open for further replies.

alisaifee76

Technical User
Oct 2, 2013
4
AE
Aastra/Ericsson systems MD110 we are having 1xx, 2xx, 4xx, 5xx 6xx 7xx, & 8xx series with DID no. now we Need to enable 3xx series extension number for New branch.
Or 301 to 340 range only.
Currently 3xxx series no. are using for system speed dial if require we can remove speed dial.
Please help me to resolve this issue.

Thanks & Regards
 
1. List all abbreviated numbers (short numbers)
ADCDP:ABB=ALL;

2. Delete all abbreviated numbers
ADCOE:ABB=3XXX&&3YYY;
3xxx is the first abbreviated number, 3yyy is the last one

3.Number analysis: remove 3 as abbreviated number prefix
NANSE:NUMTYP=AC,NUMSE=3000&&3999:

4. Assign prefix 3, as extensions:
NANSI:NUMTYP=EX, NUMSE=301&&340; ( if extensions 301 to 340 belong to same MD110, but remote LIM)
or
assign prefix 3 as access code for route
NANSI:NUMTYP=ED, NUMSE=3; ( if extensions 301 to 340 belong to another telephone system)

The Curious
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top