Need to configure 6228 HBA

[terrywashington]

I just downloaded and installed the driver for a 6228 HBA in AIX 5.1. I need to configure the HBA. Is there a .conf file somwhere to do this? I saw the "change the characteristics of an FC adapter" option in smit but the options I need to set were not listed. I need to set the HBA to 2GB and to "point-to-point".

 

[spamly]

Instead of "smitty fc", try this:
# smitty devices
> FC Adapter

                        FC Adapter

Move cursor to desired item and press Enter.

  FC Adapter
  FC SCSI I/O Controller Protocol Device
  Fibre Channel Network Protocol Device






F1=Help             F2=Refresh          F3=Cancel           F8=Image
F9=Shell            F10=Exit            Enter=Do

 

[terrywashington]

Thanks for the info. I don't see the options that I need to change under "FC Adapter" or "FC SCSI I/O Controller protocol Device". I don't have the third "Fibre Channel Network Protocol Device" option. I am running 5100-04.