Need the loadware for STMI

[kevin906]

thread965-1645525

Hipath 4K V4 R4.1.76 RMX, V4_R4.0.25 Unixware system in question had HotFix and EIP applied that delivered STMI loadware PZKSTI40.06.011-009. Does this version of loadware address the 240 day issue with the MSC errors referenced in the other thread? I don't find another HF for this version.

 

[sbcsu]

I can not find R4.1.76 anymore so I cannot find out what that loadware fixes.

If it was me and I was having those problems I would upgrade by Hard Disk changeout to the latest release which is as follows:

RMX: V4 R4.3.39
UW7: V4 ASS CV400 HF26
Loadware: V4 Specific LW Hotfix 7 for V4 R4.3.0

Good Luck...

 

[Warrenator]

What does an STMI do anyway? Found one laying around in the stock area the other day, can't seem to find much info on it.

Would be very grateful if you could help me out.

Gently does it. If gently doesn't do it, smash it with the hammer.

 

[TIgerV]

STMI is your IP Distributed Architecture board. Integrates the IP phones and TAPI gateways.

 

[sbcsu]

It can be used for IP Phones/IP Operator Consoles as one config
Also it can run remote shelves
And lastly provide IP Trunks to other equipment
Or you can combine 2 or 3 functions but you have to segment it before you start using BFDAT