Need Setting for Netgear Prosofe & FVS318 router/firewall

[nehickel]

Greetings

Thanks in advance to those who kind enough to respond to this thread. I greatly appreciate it.

I have a FVS318 firewall/router with BIOS 2.23 and the Netgear ProSave VPN client version 10.1.1 (Security Editor Version).
I am unable to get the two to work together. My goal is to have my client pc out on the Internet to be able to be considered as part of the domain that is behind the firewall/router. So that I can see the network shared drives, use the network printer and other resources.
Right now I have a class D subnet of static IP address with the firewall/router using one address and the client pc using another. Connected to the firewall/router are all of my home network resources like file shares and printers.
I have included with this message the details of the settings that the pc client (using Netgear ProSafe VPN softtware)is using and the the FVS318 VPN settings.
I would truely be greeatful if anyone could help provide me with the settings I need to establish the connection I need.

Again, Thanks in advance to those who respond to this thread

nehickel

---------------- FVS318 VPN Settings -------------------
I used the new VPN wizard in 2.23 to create VPN settings. The settings are:

Connection Name: VPN_Tunnel
Local IPSec Identifer: 0.0.0.0
Remote IPSec Identifier 0.0.0.0
Tunnel can be accessed from: a local subnet of addresses
Local LAN IP Address: 192.168.0.0
Local LAN Subnet mask: 255.255.255.0
Tunnel can access: The remote WAN IP or FQDN
Remote WAN IP or FDQN: 0.0.0.0
Secure Association: Main Mode
Perfect Forward Secrecy: Disabled
Encryption Protocol: 3DES
PreShare Key: 1234567890
Key Life: 28800
IDK Life: 86400

Things not shown on the FVS318's VPN screen are
Authorization Encryption: SHA-1

----------- ProSafe VPN Client Settings ------------------
The ProSafe Security Manager Settings are:
Connection Security: Secure
Only Connect Manually: enabled
ID Type: IP Address
Remote Party Identity & Add: <static IP of WAN side>
Protocol: All

My Identity Section:
Select Certificate: None
Pre-Shared Key 1234567890
ID Type: IP Address
Sub Box (no name) Any
Virtual Adapter Disabled
Internet interface Any
IP Addr Any

Security Policy section
Phase 1 Negotiation: Main Mode
Perfect Forward Secrecy Disabled
Replay Detection not enabled

Authentication Phase 1 proposal 1 section
Authentication method Pre-Shared Key
Encryption Alg Triple DES
Hash Alg SHA-1
SA Life Seconds --- 86400
Key Group Diffire-Hellman Group 1

Key Exchange Phase 2 Proposal 1 section
IPSec Protocols subsection
SA Life Seconds --- 86400
Compression None
Encapsulation Protocol (ESP) not checked
Authentication Protocol (AH) checked
Hash Alg SHA-1
Encapsulation Transport selected

------------------- Home Network & System ----------------

--Network is a Class D set of statics IP addressES
--FVS318 and Client are each assigned 1 static IP
--FVS318 is at BIOS 2.23
--PC Client is XP Pro with all service packs and updates
XP has been set up with a VPN network emtry but is turned off by default.
--IPSec system service is disabled by default
--SafeNet IKE services are running by default
--SafeNet Monitoring Services are running by default