Need schematic of ACS 5.0 Pwr supply

[doubleclutch]

Does anyone have a schematic of the Partner ACS 5.0 power supply board and a listout of the components? If I get that I think I can fix the board that got hit by lightning. Thanks

 

[itpphoneguy]

Hi doubleclutch,
If you find one, let me know. I normally fix them flying blind. A lightning hit may involve much more than the supply. It sounds like an insc. claim to me.

-Chris

 

[doubleclutch]

Hey Itpphoneguy, thanks for the response. I did find what looked like a good size diode that blew apart on the power supply board. I figured if someone had a schematic and I know the name of the component and its' value, I would get one and solder it in. Everything else on the boards look good. Any comments on that?

 

[itpphoneguy]

Hi doubleclutch,
The only thing I can tell you is that often parts may look fine but be defective. Anything from open, to leaky right to shorted. I've worked on the bench for 30 yrs. and without my test gear and experience I couldn't fix these things. As a matter of fact, I'd rather leave these repairs to the service center here. They know all the ins and outs. I don't.
-Chris