NEED PRI CHANGE HELP

[Idrish]

We are changing our PRI from SPRINT to ATT, What LDs do I have to go in and Change What?

Please HELP ASAP

 

[bigindian65]

you may not have to do anything, ask if they can match you -(IFC)
prt your Dch in ld 22 adan, if you are D100 or D250, they may want you to go ess4 or ess5 which, you would disable the Dch in 96 and chg it in 17. But, they should match what you have and call it a day.

Mato' Was'aka

 

[MikeRizz]

Hopefully they matched what you had. If not, and you are not familar with PRI programming, you are going to be in a mess. This is not something someone can tell you how to program over the internet.

 

[GHTROUT]

You will want these handy:

--A printout of what you have today: LD21 TYPE RDB; LD22 TYPE CFN; LD21 REQ LTM; LD20 TYPE TNB on the trunks in this route.

--The administration and maintenance books, and bookmarks to LD14, LD16, LD17, LD60, and LD96

--A cell phone, or some line that does not go through the PRI.

--The phone numbers of the vendors.

--A lock on the PBX room door.



--
Nortel Resources at GHTROUT.com
--