Need help with translation rules on CME

[wreed333]

Hey guys I have a CME system at my small business and I am now in need to translation rules because my internal 3 digit numbering plan conflicts with some area codes in the US.

I want users to have a dial a 9 then the 10 digit phone number for local calls.
I also want users to have dial a 9 then 1 then the 10 digit number for long distance.
However my provider will only accept the 10 digit phone number for both local and long distance calls.

Any help is appreiciated.

 

[pndscm]

This wouldn't be a Translation Rule issue. It is a dial-peer setting.

Here is a sample:

dial-peer voice 1 pots
destination-pattern 9[2-9].........
port X/X/X
forward-digits 10

dial-peer voice 2 pots
destination-pattern 91..........
port X/X/X
forward-digits 11

 

[wreed333]

No, I am using VOIP dial peers to a sip trunk. I must use translation rules as the prefix command the stripping the first digits from the destination-pattern command do not work.

 

[pndscm]

Have you tried 'num-exp' ? Like if your local area code was 513:
num-exp 9513....... 513.......

A translation rule would look like:

voice translation-rule 1

Rule 1 /9513/ /513/