need help with SAM

[ColoUser]

Hi all,

I'm displaying the 'Disk & File Systems' screen from SAM which only displays one of two LUNS that are on the system.
When I run ioscan -fnCdisk both LUNs are displayed. The H/W Type is device and the status is CLAIMED.

I did a pvcreate on both of the physical devices thinking that would make them display in SAM.

I'm running 11.0 on a hp 9000/800/N4000-55 server, A5158A-PCI Tachyon TL/TS Fibre Channel. The LUNs are on an hsg080 device.

Any ideas?

 

[dobbyn]

Have you tried going through the "Diagnose missing disk" screen in SAM? This might provide some suggestions.

 

[ColoUser]

dobbyn,
Thanks for looking at this. I did run "Diagnose Missing Disk". It executed the scan again and displayed the same list of disks. There were no error messages.

Below is the line entry for the disk from SAM and the ioscan for the 2 luns. Can't figure out what is going on with SAM.


hardware No. of Volume Total
path Paths Use Group Mbytes Description

255/0.0.1 2 LVM vg01/vg02 17361 HSG80 LUN 0x600...



ioscan -fnCdisk
Class I H/W Path Driver S/W State H/W Type Description
=======================================================================
/dev/dsk/c2t6d0 /dev/rdsk/c2t6d0
disk 3 255/0.0.1 sdisk CLAIMED DEVICE HSG80 LUN 0x60001F
E10007B21000098340195603BF
/dev/dsk/c37t0d1 /dev/rdsk/c37t0d1
disk 6 255/0.0.2 sdisk CLAIMED DEVICE HSG80 LUN 0x60001F
E10007B21000098340195603C0

/dev/dsk/c37t0d2 /dev/rdsk/c37t0d2



# pvdisplay /dev/dsk/c37t0d1
--- Physical volumes ---
PV Name /dev/dsk/c37t0d1
VG Name /dev/vg01
PV Status available
Allocatable yes
VGDA 2
Cur LV 0
PE Size (Mbytes) 4
T

# pvdisplay /dev/dsk/c37t0d2
--- Physical volumes ---
PV Name /dev/dsk/c37t0d2
VG Name /dev/vg02
PV Status available
Allocatable yes
VGDA 2
Cur LV 0
PE Size (Mbytes) 4
Total PE 4339
Free PE 4339