Just getting my feet wet with scsi but I can see something is wrong and was wondering if someone could help.When benching my old ide drive,I get 22mb/sec on read-write and the bench score for the scsi drive is 15.6mb/sec on read-write.Something is wrong here.
Both drives=ntfs-xp
32bit pci
seagate ultra2 80 pin lvd set to id0
icydoc tray set to id0
adaptec lvd cable
atto dual chan ultra2 adaptor(ul2d)
The bios is set to 40/80lvd,luns 0 thru 9 and id0 is set to drive=yes with all other ids set to drive=no,se is set to 15/20mb sec,
It seems as though the drive is running in se mode but I"m not sure.I have tried a different cable and switched channels but I get exactly the same bench.
Both drives=ntfs-xp
32bit pci
seagate ultra2 80 pin lvd set to id0
icydoc tray set to id0
adaptec lvd cable
atto dual chan ultra2 adaptor(ul2d)
The bios is set to 40/80lvd,luns 0 thru 9 and id0 is set to drive=yes with all other ids set to drive=no,se is set to 15/20mb sec,
It seems as though the drive is running in se mode but I"m not sure.I have tried a different cable and switched channels but I get exactly the same bench.