Need Help to print subreport starting half way down paper all the time 2

[toptech]

Hi There.

I am trying to print s subreport within a report.

This subreport must always start at the same location on the paper. The paper is 8.5 X 11 and is perforated.

Any suggestions would be helpful.

Thanks in advance.

Jeff- Toptech

 

[VogonPoet]

Can you provide more information on the report:

- Where in the main report does the subreport appear
(in what section)
- General overview of report and subreport

Michael
michaelhodes@managedcare.com

 

[CosmoKramer]

Check the Top property for your subreport. You can use this within the main report to specify how far from the top of its section you want the subreport to start.

HTH

 

[toptech]

Thanks for your help.

I decided to change the report so that it prints the report twice, once on each page, as opposed to printing the same report twice on one sheet of paper.

There were too many limitations of the number of detail lines that could be printed on the one page.

Thanks again for your help.


Toptech