Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Need help to configure SYSLOG host
- Thread starter danmark
- Start date
Open your telnet/HT session to ur pix, then enter the following
logging host (interface name) (ip address)
this specifies where your syslog server resides ie which interface, and of course its IP.
Then just turn on your logging service:
logging on
btw if you have the manual that comes with the pix best way is just to use the command reference towards the back, easier reading and quite detailed.
logging host (interface name) (ip address)
this specifies where your syslog server resides ie which interface, and of course its IP.
Then just turn on your logging service:
logging on
btw if you have the manual that comes with the pix best way is just to use the command reference towards the back, easier reading and quite detailed.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question