vzczt1prtld
Technical User
need help getting into programing a i2004 nortel phone it is asking for a device id and password ????
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
need help programming a ip2004 nortel phone
- Thread starter vzczt1prtld
- Start date
- Status
Usually it asks for the extn number you are going to assign.
The password is whatever the system has been set up with to register the phone.
You could try the default one or go into the bcm and change it yourself.
Sorry can't give out passwords.
The password is whatever the system has been set up with to register the phone.
You could try the default one or go into the bcm and change it yourself.
Sorry can't give out passwords.
Firebird Scrambler
Programmer
I think the IP set programming was set up so that you had to use the BCM's login account and password.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
Funny I was just at a site that was set up like that.
I had to use the numerical login and telst password to register the phone.
This happens if the registration password us blank.
It forces you to use the teleset login details instead
I had to use the numerical login and telst password to register the phone.
This happens if the registration password us blank.
It forces you to use the teleset login details instead
- Status
Similar threads
- Locked
- Question