I have never done this before on a Cisco router and need some help doing it.
I have an Enhanced ATM card in Slot 1.
The DS3 connected to this card has been provisioned this way.
1. 3 Meg vbr PVC for DSL subscribers on VPI 2.
2. 12 vbr Meg PVC going to an IMA circut on VPI 3
3. 3 vbr Meg ciruct for Frame-Relay connections on VPI4
4. 22 vbr Meg for the remainder of the pipe not used.
My router is a Cisco 7206.
I need to know how to configure DSL, an IMA and Frame-Relay connections. The ADSL and Frames are already established and are being moved into this box from an Assured Access. I know how to do this in the Assured but don't understand how it is done on the Cisco. Could someone please help me out here?
I already have a Serail DS3 card in Slot 2 on this box that is used for my Internet Connection.
Thank you in advance.
Tony D. Koehn
I have an Enhanced ATM card in Slot 1.
The DS3 connected to this card has been provisioned this way.
1. 3 Meg vbr PVC for DSL subscribers on VPI 2.
2. 12 vbr Meg PVC going to an IMA circut on VPI 3
3. 3 vbr Meg ciruct for Frame-Relay connections on VPI4
4. 22 vbr Meg for the remainder of the pipe not used.
My router is a Cisco 7206.
I need to know how to configure DSL, an IMA and Frame-Relay connections. The ADSL and Frames are already established and are being moved into this box from an Assured Access. I know how to do this in the Assured but don't understand how it is done on the Cisco. Could someone please help me out here?
I already have a Serail DS3 card in Slot 2 on this box that is used for my Internet Connection.
Thank you in advance.
Tony D. Koehn
