Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need Help in Decryption

Status
Not open for further replies.

shahinmirzaei

Programmer
Feb 16, 2011
1
IR
hi all,
I'm new in delphi and I'm sorry if my Question is very Simple.
I have a database that filled by Someonle else. they Emcrypt a text like 041234FFFFFFFFFF in .net with the key as below:
byte[] Key ={ 191, 124, 211, 244, 11, 118, 151, 22, 112, 67, 214, 25, 47, 171, 239, 155, 191, 124, 211, 244, 11, 118, 151, 22 };
byte[] IV ={ 0, 0, 0, 0, 0, 0, 0, 0 };

and put the value 54E7C4E68F219452 into the DB.
they need me to Decrypt thet value to orginal value 041234FFFFFFFFFF .
I found many Units but non of them could Decrypt the value truly
the .net code that Decrypt truly is:

byte[] Key ={ 191, 124, 211, 244, 11, 118, 151, 22, 112, 67, 214, 25, 47, 171, 239, 155, 191, 124, 211, 244, 11, 118, 151, 22 };
byte[] IV ={ 0, 0, 0, 0, 0, 0, 0, 0 };
byte[] input ={ 0, 0, 0, 0, 0, 0, 0, 0 };
byte[] output = new byte[0];
byte[] output1 = new byte[0];
char c=' ';
int i, j, k;
for (i = 0; i < (textBox3.Text.Length / 2); i++)
{
j = Convert.ToInt16(textBox3.Text[2 * i]);
if ((j > 47) && (j < 58))
j = j - 48;
else if ((j > 64) && (j < 91))
j = j - 55;
else if ((j > 96) && (j < 123))
j = j - 87;
k = j * 16;
j = Convert.ToInt16(textBox3.Text[2 * i + 1]);
if ((j > 47) && (j < 58))
j = j - 48;
else if ((j > 64) && (j < 91))
j = j - 55;
else if ((j > 96) && (j < 123))
j = j - 87;
k = k + j;
input = Convert.ToByte(k);
}
TripleDES TDES = TripleDES.Create();
TDES.IV = IV;
TDES.Key = Key;
TDES.Mode = CipherMode.CBC;
TDES.Padding = PaddingMode.Zeros;
ICryptoTransform ICT = TDES.CreateDecryptor();
output = ICT.TransformFinalBlock(input, 0, input.Length);
for (i = 0; i < (textBox3.Text.Length / 2); i++)
{
j = output / 16;
if (j < 10)
c = Convert.ToChar(j + 48);
else if (j > 9)
c = Convert.ToChar(j + 55);
textBox4.Text += c;
j = output % 16;
if (j < 10)
c = Convert.ToChar(j + 48);
else if (j > 9)
c = Convert.ToChar(j + 55);
textBox4.Text += c;
}


and one of the units I found in delphi is:

unit UnitDes64;

interface

uses SysUtils,Dialogs;

type
TKeyByte = array[0..5] of Byte;
TDesMode = (dmEncry, dmDecry);

function EncryStr(Str, Key: String): String;
function DecryStr(Str, Key: String): String;
function EncryStrHex(Str, Key: String): String;
function DecryStrHex(StrHex, Key: String): String;

const
BitIP: array[0..63] of Byte =
(57, 49, 41, 33, 25, 17, 9, 1,
59, 51, 43, 35, 27, 19, 11, 3,
61, 53, 45, 37, 29, 21, 13, 5,
63, 55, 47, 39, 31, 23, 15, 7,
56, 48, 40, 32, 24, 16, 8, 0,
58, 50, 42, 34, 26, 18, 10, 2,
60, 52, 44, 36, 28, 20, 12, 4,
62, 54, 46, 38, 30, 22, 14, 6 );

BitCP: array[0..63] of Byte =
( 39, 7, 47, 15, 55, 23, 63, 31,
38, 6, 46, 14, 54, 22, 62, 30,
37, 5, 45, 13, 53, 21, 61, 29,
36, 4, 44, 12, 52, 20, 60, 28,
35, 3, 43, 11, 51, 19, 59, 27,
34, 2, 42, 10, 50, 18, 58, 26,
33, 1, 41, 9, 49, 17, 57, 25,
32, 0, 40, 8, 48, 16, 56, 24 );

BitExp: array[0..47] of Integer =
( 31, 0, 1, 2, 3, 4, 3, 4, 5, 6, 7, 8, 7, 8, 9,10,
11,12,11,12,13,14,15,16,15,16,17,18,19,20,19,20,
21,22,23,24,23,24,25,26,27,28,27,28,29,30,31,0 );

BitPM: array[0..31] of Byte =
( 15, 6,19,20,28,11,27,16, 0,14,22,25, 4,17,30, 9,
1, 7,23,13,31,26, 2, 8,18,12,29, 5,21,10, 3,24 );

sBox: array[0..7] of array[0..63] of Byte =
( ( 14, 4, 13, 1, 2, 15, 11, 8, 3, 10, 6, 12, 5, 9, 0, 7,
0, 15, 7, 4, 14, 2, 13, 1, 10, 6, 12, 11, 9, 5, 3, 8,
4, 1, 14, 8, 13, 6, 2, 11, 15, 12, 9, 7, 3, 10, 5, 0,
15, 12, 8, 2, 4, 9, 1, 7, 5, 11, 3, 14, 10, 0, 6, 13 ),

( 15, 1, 8, 14, 6, 11, 3, 4, 9, 7, 2, 13, 12, 0, 5, 10,
3, 13, 4, 7, 15, 2, 8, 14, 12, 0, 1, 10, 6, 9, 11, 5,
0, 14, 7, 11, 10, 4, 13, 1, 5, 8, 12, 6, 9, 3, 2, 15,
13, 8, 10, 1, 3, 15, 4, 2, 11, 6, 7, 12, 0, 5, 14, 9 ),

( 10, 0, 9, 14, 6, 3, 15, 5, 1, 13, 12, 7, 11, 4, 2, 8,
13, 7, 0, 9, 3, 4, 6, 10, 2, 8, 5, 14, 12, 11, 15, 1,
13, 6, 4, 9, 8, 15, 3, 0, 11, 1, 2, 12, 5, 10, 14, 7,
1, 10, 13, 0, 6, 9, 8, 7, 4, 15, 14, 3, 11, 5, 2, 12 ),

( 7, 13, 14, 3, 0, 6, 9, 10, 1, 2, 8, 5, 11, 12, 4, 15,
13, 8, 11, 5, 6, 15, 0, 3, 4, 7, 2, 12, 1, 10, 14, 9,
10, 6, 9, 0, 12, 11, 7, 13, 15, 1, 3, 14, 5, 2, 8, 4,
3, 15, 0, 6, 10, 1, 13, 8, 9, 4, 5, 11, 12, 7, 2, 14 ),

( 2, 12, 4, 1, 7, 10, 11, 6, 8, 5, 3, 15, 13, 0, 14, 9,
14, 11, 2, 12, 4, 7, 13, 1, 5, 0, 15, 10, 3, 9, 8, 6,
4, 2, 1, 11, 10, 13, 7, 8, 15, 9, 12, 5, 6, 3, 0, 14,
11, 8, 12, 7, 1, 14, 2, 13, 6, 15, 0, 9, 10, 4, 5, 3 ),

( 12, 1, 10, 15, 9, 2, 6, 8, 0, 13, 3, 4, 14, 7, 5, 11,
10, 15, 4, 2, 7, 12, 9, 5, 6, 1, 13, 14, 0, 11, 3, 8,
9, 14, 15, 5, 2, 8, 12, 3, 7, 0, 4, 10, 1, 13, 11, 6,
4, 3, 2, 12, 9, 5, 15, 10, 11, 14, 1, 7, 6, 0, 8, 13 ),

( 4, 11, 2, 14, 15, 0, 8, 13, 3, 12, 9, 7, 5, 10, 6, 1,
13, 0, 11, 7, 4, 9, 1, 10, 14, 3, 5, 12, 2, 15, 8, 6,
1, 4, 11, 13, 12, 3, 7, 14, 10, 15, 6, 8, 0, 5, 9, 2,
6, 11, 13, 8, 1, 4, 10, 7, 9, 5, 0, 15, 14, 2, 3, 12 ),

( 13, 2, 8, 4, 6, 15, 11, 1, 10, 9, 3, 14, 5, 0, 12, 7,
1, 15, 13, 8, 10, 3, 7, 4, 12, 5, 6, 11, 0, 14, 9, 2,
7, 11, 4, 1, 9, 12, 14, 2, 0, 6, 10, 13, 15, 3, 5, 8,
2, 1, 14, 7, 4, 10, 8, 13, 15, 12, 9, 0, 3, 5, 6, 11 ) );

BitPMC1: array[0..55] of Byte =
( 56, 48, 40, 32, 24, 16, 8,
0, 57, 49, 41, 33, 25, 17,
9, 1, 58, 50, 42, 34, 26,
18, 10, 2, 59, 51, 43, 35,
62, 54, 46, 38, 30, 22, 14,
6, 61, 53, 45, 37, 29, 21,
13, 5, 60, 52, 44, 36, 28,
20, 12, 4, 27, 19, 11, 3 );

BitPMC2: array[0..47] of Byte =
( 13, 16, 10, 23, 0, 4,
2, 27, 14, 5, 20, 9,
22, 18, 11, 3, 25, 7,
15, 6, 26, 19, 12, 1,
40, 51, 30, 36, 46, 54,
29, 39, 50, 44, 32, 47,
43, 48, 38, 55, 33, 52,
45, 41, 49, 35, 28, 31 );

var
subKey: array[0..15] of TKeyByte;
inData :array[0..7] of Byte = (84,231,196,230,143,33,148,82);
keyByte: array[0..23] of Byte =(191, 124, 211, 244, 11, 118, 151, 22, 112, 67, 214, 25, 47, 171, 239, 155, 191, 124, 211, 244, 11, 118, 151, 22 );

implementation

procedure initPermutation(var inData: array of Byte);
var
newData: array[0..7] of Byte;
i: Integer;
begin
FillChar(newData, 8, 0);
for i := 0 to 63 do
if (inData[BitIP shr 3] and (1 shl (7- (BitIP and $07)))) <> 0 then
newData[i shr 3] := newData[i shr 3] or (1 shl (7-(i and $07)));
for i := 0 to 7 do inData := newData;
end;

procedure conversePermutation(var inData: array of Byte);
var
newData: array[0..7] of Byte;
i: Integer;
begin
FillChar(newData, 8, 0);
for i := 0 to 63 do
if (inData[BitCP shr 3] and (1 shl (7-(BitCP and $07)))) <> 0 then
newData[i shr 3] := newData[i shr 3] or (1 shl (7-(i and $07)));
for i := 0 to 7 do inData := newData;
end;

procedure expand(inData: array of Byte; var outData: array of Byte);
var
i: Integer;
begin
FillChar(outData, 6, 0);
for i := 0 to 47 do
if (inData[BitExp shr 3] and (1 shl (7-(BitExp and $07)))) <> 0 then
outData[i shr 3] := outData[i shr 3] or (1 shl (7-(i and $07)));
end;

procedure permutation(var inData: array of Byte);
var
newData: array[0..3] of Byte;
i: Integer;
begin
FillChar(newData, 4, 0);
for i := 0 to 31 do
if (inData[BitPM shr 3] and (1 shl (7-(BitPM and $07)))) <> 0 then
newData[i shr 3] := newData[i shr 3] or (1 shl (7-(i and $07)));
for i := 0 to 3 do inData := newData;
end;

function si(s,inByte: Byte): Byte;
var
c: Byte;
begin
c := (inByte and $20) or ((inByte and $1e) shr 1) or
((inByte and $01) shl 4);
Result := (sBox[c] and $0f);
end;

procedure permutationChoose1(inData: array of Byte;
var outData: array of Byte);
var
i: Integer;
begin
FillChar(outData, 7, 0);
for i := 0 to 55 do
if (inData[BitPMC1 shr 3] and (1 shl (7-(BitPMC1 and $07)))) <> 0 then
outData[i shr 3] := outData[i shr 3] or (1 shl (7-(i and $07)));
end;

procedure permutationChoose2(inData: array of Byte;
var outData: array of Byte);
var
i: Integer;
begin
FillChar(outData, 6, 0);
for i := 0 to 47 do
if (inData[BitPMC2 shr 3] and (1 shl (7-(BitPMC2 and $07)))) <> 0 then
outData[i shr 3] := outData[i shr 3] or (1 shl (7-(i and $07)));
end;
procedure cycleMove(var inData: array of Byte; bitMove: Byte);
var
i: Integer;
begin
for i := 0 to bitMove - 1 do
begin
inData[0] := (inData[0] shl 1) or (inData[1] shr 7);
inData[1] := (inData[1] shl 1) or (inData[2] shr 7);
inData[2] := (inData[2] shl 1) or (inData[3] shr 7);
inData[3] := (inData[3] shl 1) or ((inData[0] and $10) shr 4);
inData[0] := (inData[0] and $0f);
end;
end;

procedure makeKey(inKey: array of Byte; var outKey: array of TKeyByte);
const
bitDisplace: array[0..15] of Byte =
( 1,1,2,2, 2,2,2,2, 1,2,2,2, 2,2,2,1 );
var
outData56: array[0..6] of Byte;
key28l: array[0..3] of Byte;
key28r: array[0..3] of Byte;
key56o: array[0..6] of Byte;
i: Integer;
begin
permutationChoose1(inKey, outData56);

key28l[0] := outData56[0] shr 4;
key28l[1] := (outData56[0] shl 4) or (outData56[1] shr 4);
key28l[2] := (outData56[1] shl 4) or (outData56[2] shr 4);
key28l[3] := (outData56[2] shl 4) or (outData56[3] shr 4);
key28r[0] := outData56[3] and $0f;
key28r[1] := outData56[4];
key28r[2] := outData56[5];
key28r[3] := outData56[6];

for i := 0 to 15 do
begin
cycleMove(key28l, bitDisplace);
cycleMove(key28r, bitDisplace);
key56o[0] := (key28l[0] shl 4) or (key28l[1] shr 4);
key56o[1] := (key28l[1] shl 4) or (key28l[2] shr 4);
key56o[2] := (key28l[2] shl 4) or (key28l[3] shr 4);
key56o[3] := (key28l[3] shl 4) or (key28r[0]);
key56o[4] := key28r[1];
key56o[5] := key28r[2];
key56o[6] := key28r[3];
permutationChoose2(key56o, outKey);
end;
end;

procedure encry(inData, subKey: array of Byte;
var outData: array of Byte);
var
outBuf: array[0..5] of Byte;
buf: array[0..7] of Byte;
i: Integer;

begin
expand(inData, outBuf);
for i := 0 to 5 do outBuf := outBuf xor subKey;
// outBuf xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
buf[0] := outBuf[0] shr 2; //xxxxxx -> 2
buf[1] := ((outBuf[0] and $03) shl 4) or (outBuf[1] shr 4); // 4 <- xx xxxx -> 4
buf[2] := ((outBuf[1] and $0f) shl 2) or (outBuf[2] shr 6); // 2 <- xxxx xx -> 6
buf[3] := outBuf[2] and $3f; // xxxxxx
buf[4] := outBuf[3] shr 2; // xxxxxx
buf[5] := ((outBuf[3] and $03) shl 4) or (outBuf[4] shr 4); // xx xxxx
buf[6] := ((outBuf[4] and $0f) shl 2) or (outBuf[5] shr 6); // xxxx xx
buf[7] := outBuf[5] and $3f; // xxxxxx
for i := 0 to 7 do buf := si(i, buf);
for i := 0 to 3 do outBuf := (buf[i*2] shl 4) or buf[i*2+1];
permutation(outBuf);
for i := 0 to 3 do outData := outBuf;
end;

procedure desData(desMode: TDesMode;
inData2: array of Byte; var outData: array of Byte);
// inData, outData ¶¼??8Bytes£¬·???³?´?
var
i, j: Integer;
temp, buf: array[0..3] of Byte;

begin

for i := 0 to 7 do outData := inData;
initPermutation(outData);
if desMode = dmEncry then
begin
for i := 0 to 15 do
begin
for j := 0 to 3 do temp[j] := outData[j]; //temp = Ln
for j := 0 to 3 do outData[j] := outData[j + 4]; //Ln+1 = Rn
encry(outData, subKey, buf); //Rn ==Kn==> buf
for j := 0 to 3 do outData[j + 4] := temp[j] xor buf[j]; //Rn+1 = Ln^buf
end;

for j := 0 to 3 do temp[j] := outData[j + 4];
for j := 0 to 3 do outData[j + 4] := outData[j];
for j := 0 to 3 do outData[j] := temp[j];
end
else if desMode = dmDecry then
begin
//for i := 15 downto 0 do
i := 16;
while i>0 do
begin
dec(i);
for j := 0 to 3 do temp[j] := outData[j];
for j := 0 to 3 do outData[j] := outData[j + 4];
encry(outData, subKey , buf); //
for j := 0 to 3 do outData[j + 4] := temp[j] xor buf[j];

end;
for j := 0 to 3 do temp[j] := outData[j + 4];
for j := 0 to 3 do outData[j + 4] := outData[j];
for j := 0 to 3 do outData[j] := temp[j];
end;
conversePermutation(outData);
outData[0] := outData[0] - 29;
outData[1] := outData[1] - 126;
outData[2] := outData[2] + 56;
end;

//////////////////////////////////////////////////////////////

function EncryStr(Str, Key: String): String;
var
StrByte, OutByte, KeyByte: array[0..7] of Byte;
StrResult: String;
I, J: Integer;
begin
if (Length(Str) > 0) and (Ord(Str[Length(Str)]) = 0) then
raise Exception.Create('Error: the last char is NULL char.');
if Length(Key) < 8 then
while Length(Key) < 8 do Key := Key + Chr(0);
while Length(Str) mod 8 <> 0 do Str := Str + Chr(0);

for J := 0 to 7 do KeyByte[J] := Ord(Key[J + 1]);
//makeKey(keyByte, subKey);

StrResult := '';

for I := 0 to Length(Str) div 8 - 1 do
begin
for J := 0 to 7 do
StrByte[J] := Ord(Str[I * 8 + J + 1]);
desData(dmEncry, StrByte, OutByte);
for J := 0 to 7 do

StrResult := StrResult + Chr(OutByte[J]);
end;

Result := StrResult;
end;

function DecryStr(Str, Key: String): String;
var
StrByte, OutByte: array[0..7] of Byte; //, KeyByte
StrResult: String;
I, J: Integer;
begin
if Length(Key) < 8 then
while Length(Key) < 8 do Key := Key + Chr(0);

//for J := 0 to 7 do KeyByte[J] := Ord(Key[J + 1]);
makeKey(keyByte, subKey);

StrResult := '';

for I := 0 to Length(Str) div 8 - 1 do
begin
for J := 0 to 7 do StrByte[J] := Ord(Str[I * 8 + J + 1]);
desData(dmDecry, StrByte, OutByte);
for J := 0 to 7 do
begin
StrResult := StrResult + Chr(OutByte[J]);
end;

end;
while (Length(StrResult) > 0) and
(Ord(StrResult[Length(StrResult)]) = 0) do
Delete(StrResult, Length(StrResult), 1);
Result := StrResult;
end;

///////////////////////////////////////////////////////////

function EncryStrHex(Str, Key: String): String;
var
StrResult, TempResult, Temp: String;
I: Integer;
begin
TempResult := EncryStr(Str, Key);
StrResult := '';
for I := 0 to Length(TempResult) - 1 do
begin
Temp := Format('%x', [Ord(TempResult[I + 1])]);
if Length(Temp) = 1 then Temp := '0' + Temp;
StrResult := StrResult + Temp;
end;
Result := StrResult;
end;

function DecryStrHex(StrHex, Key: String): String;
function HexToInt(Hex: String): Integer;
var
I, Res: Integer;
ch: Char;
begin
Res := 0;
for I := 0 to Length(Hex) - 1 do
begin
ch := Hex[I + 1];
if (ch >= '0') and (ch <= '9') then
Res := Res * 16 + Ord(ch) - Ord('0')
else if (ch >= 'A') and (ch <= 'F') then
Res := Res * 16 + Ord(ch) - Ord('A') + 10
else if (ch >= 'a') and (ch <= 'f') then
Res := Res * 16 + Ord(ch) - Ord('a') + 10
else raise Exception.Create('Error: not a Hex String');
end;
Result := Res;
end;

var
Str, Temp: String;
I: Integer;
begin
Str := '';
for I := 0 to Length(StrHex) div 2 - 1 do
begin
Temp := Copy(StrHex, I * 2 + 1, 2);
Str := Str + Chr(HexToInt(Temp));
end;
Result := DecryStr(Str, Key);
end;

end.

////////////////////////////////////////////////////
thanks for your help
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top