NEED HELP CALLING IP PHONE FROM MERIDIAN OPT61

[GARREN]

MY PROBLEM IS CAN NOT CALL EXT 3000 IP FROM MERIDIAN OPT61.MERIDIAN HAS ALREADY BEEN SET UP TO CALL IP PHONES THROUGH CISCO ROUTER.MY SWITCH WILL NOT LET ME SETUP 3000 EXTINSONS.MY QUESTION IS HOW DO I SETUP 3000 GRP EXTINSONS.I ALSO HAVE CALL FEATURES IMPLEMENTED USING 33 AS CALL PICKUP.

 

[Gumpus]

do you have any 3000 DN's assigned?

Try this:
LD 20
REQ: PRT
TYPE: DNB
CUST 0
DN 3

Then you will know what you have as far as assigned 3000's

Do you get a SCH code when you try to assign the 3000 DN?

 

[GARREN]

WHEN TRY TO ASSIGN GRP 3000 RECEIVE SCH0371
WHEN I DO LD 20
REG PRT
TYPE DNB
CUST 0
DN3
TYPE SFP [THIS IS WHAT I GET]

 

[Gumpus]

The SCH0371 message says: Shorter directory number already exists.

What is SFP?

 

[eileenc]

I'm having trouble dialing out on a fax machine. I have a dial tone, but then it goes to a fast busy.

 

[Supernn]

Probably the port has not been set up yet. Try to print the TN.
REQ PRT
TYPE TNB
CUST 0
TN ll ss cc uu

If the error SCH0805 there's no port created

 

[BMiles2000]

Your SPRE code is more than likely 30. Goto ld 21 and prt , ftr you will see the prompt for SPRE. You can change your SPRE in ld 15. Good Luck