Hi,
This is a follow-up to my post the other day regarding my firewall, which seems to require a reboot every other day to remain functional. I suspect perhaps it is a denial-of-service attack. I cannot telnet into the pix firewall when it is not functional and need to physically re-boot it.
The firewall is a pix 515 R and is running IOS v4.4. I am not sure if syslogging is enabled since I inherited monitoring the firewalls just recently and the records aren't good here. The config is as follows:
hostname cobipix
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 1720
fixup protocol rsh 514
fixup protocol smtp 25
fixup protocol sqlnet 1521
names
pager lines 24
logging on
no logging timestamp
no logging console
no logging monitor
no logging buffered
no logging trap
logging facility 20
logging queue 512
interface ethernet0 auto
interface ethernet1 auto
mtu outside 1500
mtu inside 1500
ip address outside xx.xx.xx.xx 255.255.255.224
ip address inside 192.168.1.254 255.255.255.0
arp timeout 14400
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
conduit permit tcp any any eq 5631
conduit permit udp any any eq 5632
outbound 10 permit 0.0.0.0 0.0.0.0 5631 tcp
outbound 11 permit 0.0.0.0 0.0.0.0 5632 udp
no rip outside passive
no rip outside default
no rip inside passive
no rip inside default
route outside 0.0.0.0 0.0.0.0 66.158.63.65 1
timeout xlate 3:00:00 conn 1:00:00 half-closed 0:10:00 udp 0:02:00
timeout rpc 0:10:00 h323 0:05:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
telnet 192.168.1.0 255.255.255.0
telnet timeout 5
terminal width 80
Any assistance would be appreciated. The conduit ports are open for pc anywhere.
Thanks!
This is a follow-up to my post the other day regarding my firewall, which seems to require a reboot every other day to remain functional. I suspect perhaps it is a denial-of-service attack. I cannot telnet into the pix firewall when it is not functional and need to physically re-boot it.
The firewall is a pix 515 R and is running IOS v4.4. I am not sure if syslogging is enabled since I inherited monitoring the firewalls just recently and the records aren't good here. The config is as follows:
hostname cobipix
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 1720
fixup protocol rsh 514
fixup protocol smtp 25
fixup protocol sqlnet 1521
names
pager lines 24
logging on
no logging timestamp
no logging console
no logging monitor
no logging buffered
no logging trap
logging facility 20
logging queue 512
interface ethernet0 auto
interface ethernet1 auto
mtu outside 1500
mtu inside 1500
ip address outside xx.xx.xx.xx 255.255.255.224
ip address inside 192.168.1.254 255.255.255.0
arp timeout 14400
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
conduit permit tcp any any eq 5631
conduit permit udp any any eq 5632
outbound 10 permit 0.0.0.0 0.0.0.0 5631 tcp
outbound 11 permit 0.0.0.0 0.0.0.0 5632 udp
no rip outside passive
no rip outside default
no rip inside passive
no rip inside default
route outside 0.0.0.0 0.0.0.0 66.158.63.65 1
timeout xlate 3:00:00 conn 1:00:00 half-closed 0:10:00 udp 0:02:00
timeout rpc 0:10:00 h323 0:05:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
telnet 192.168.1.0 255.255.255.0
telnet timeout 5
terminal width 80
Any assistance would be appreciated. The conduit ports are open for pc anywhere.
Thanks!