need an answer on a simple question 2

[rsaguy]

All,
I'm on HP-UX 11.0 and i'm trying to find the processer type and is it PA-RISC 2 or 1? Any ideas how i can do that?

thx.

 

[crowe]

The processor type on the more recent HP-UX hardware will probably be a RISC PA8400, RISK PA8500 or RISK PA8600. What type or HW (model) do you have?

crowe

 

[unixqueen]

Hi

Run up SAM, go to Performance Monitors then System Properties, click on processors, and this will have the info that you asked about.

Regards
Queenie

 

[patel]

Hi

Thanks to JRF.
1. 'model' will return the processor name;

2. Match the output from 'uname -m' with /usr/sam/lib/mo/sched.models to find the PA-RISC version of your processor. /usr/sam/lib/mo/sched.models will be as current as your SAM patches.

3. 'getconf KERNEL_BITS' will return whether you are running 32- or 64-bit.

4. 'getconf HW_32_64_CAPABLE' will show whether your processor is 64-bit capable or not.

5. To find the processor speed (MHz):

# echo itick_per_usec/D | adb -k stand/vmunix /dev/mem

Patel

 

[jamal123]

Hi
It's simple PA-RISC 2 64 bit processor
PA-Risc 1 34 bit processor