Need Advice

[nortelcs100e5]

Hi all, need advice in the following CS1000E ,rls 5 installation.I read NTP`s but they are a bit hard and mixed to understand. PBX spec are
(1) 4 cabinets.
(2) 185 analog extension,32 digital ext,25 Soft IP ext
3 PRI`s,24 COT lines with Call Pilot 600r and MICB.
MWLC cards = 12
DLC Cards = 02
DXUT Cards = 03
MGATE card = 01
PRI cards = 03
MICB card = 01

(3) Main Cab MGC have 96 DSP D/B and other 3 cabinets
MGC have 32 DSP D/B.
Now Need some Advice/Help in these questions.

(a) Do i have to create Conf/TDS/DTR on each MGC and from
where i start Conf/TDS loop of each MGC.
(b) What will be the most secure or proper slot
assignments for cards in all 4 cabinets.

Any advise will be greatly appreciated.

 

[johnpoole]

card assignments are up to you.. i think you still need to put your pri's in the 1st slots... dtr's are built on card 0, the ssc card.. someone else can let you know if you need more... dtr's are only used for analog stations and inbound did's so i don;t see a need on a mgc.. not sure on that one..

john poole
bellsouth business
columbia,sc

 

[nortelcs100e5]

John it is a 4 cabinet system and i got 4 MGC with this.i just need CONF/TDS inso and card slot assignments.
regards