JesusBowls
Technical User
Hello to everybody.
This is my first post here and it regards problem with connection between my TRAPEZE MX-8 and RingMaster software v.7.1
I have full access to the MX-8 console trough the serial connection. Enable mode is ON.
Problem is that RingMaster can not list my MX-8 in list of available devices for the mobility domain that I'm trying to configure. Any help is highly appriciated.
In order to provide some basic information on current config settings, I list tech system details below:
========= show system details =========
================================================================================
Product Name: MX-8
System Name: MX-8
System Country Code: DK
System Location:
System Contact:
System IP Address: 10.9.0.177
System Idle Timeout: 3600
System MAC: 00:0B:0E:31:0A:37
================================================================================
Boot Time: 2010-10-19 11:29:59
Uptime: 0 days 00:01:59
================================================================================
Fan Status: Fan1 OK Fan2 OK
PSU Status: Power Supply AC OK DC OK.
Memory [MB]: 62.02/128.00 (48%)
Total PoE Draw [W]: 2.726
================================================================================
Alternate DoC Format
================================================================================
========= show license =========
Serial Number : 0620200064
12 ports are enabled
Additional Features:
Mesh Service : 0
========= show version details =========
Mobility System Software, Version: 6.0.3.2 REL
Copyright (c) 2002 - 2007 Trapeze Networks, Inc. All rights reserved.
Build Information: (build#0) REL_6_0_3_branch 2007-06-22 16:55:00
Label: REL_6.0.3.2.0_062207
Build Suffix: -d-O1
Model: MX-8
Hardware
Mainboard: version 1 ; revision K ; FPGA version 8
CPU Model: 405EP (Revision 9.80)
Serial number 0620200064
Flash: 1.0.0 - 0
Kernel: QNX-630
BootLoader: 4.3 / 6.0.7
AP AP Model Serial # Versions
----- ------------ -------------- ------------------------
========= show boot =========
Configured boot version: 6.0.3.2.0
Configured boot image: boot1:MX050701.008
Configured boot configuration: file:configuration
Backup boot configuration: NONE
Booted version: 6.0.3.2.0
Booted image: boot1:MX050701.008
Booted configuration: file:configuration
Product model: MX-8
========= show configuration =========
# Configuration nvgen'd at 2010-10-19 11:31:58
# Image 6.0.3.2.0
# Model MX-8
# Last change occurred at 2010-10-19 11:30:23
set ip route default 10.45.100.1 1
set ip route default 10.9.0.1 1
set system name MX-8
set system ip-address 10.9.0.177
set system countrycode DK
set timezone CET 2 0
set service-profile Open ssid-name parknet
set service-profile Open auth-fallthru last-resort
set service-profile Open wpa-ie enable
set service-profile Open rsn-ie enable
set service-profile Open cipher-tkip disable
set service-profile Open cipher-ccmp enable
set service-profile Open psk-raw 9358c3267c9f99645b35dcf37107972839afab7258ee187541965e405e88da63
set service-profile Open auth-psk enable
set service-profile Open auth-dot1x disable
set service-profile Open attr vlan-name default
set enablepass password 08b5e61e349f753a79af65572914740c49e9
set user admin password encrypted 070e25414707
set radio-profile default service-profile Open
set ap 1 serial-id 0771100392 model MP-422
set ap 1 radio 1 channel 1 tx-power 3 mode enable
set ap 1 radio 2 tx-power 3 mode enable
set port poe 1 enable
set vlan 1 port 1
set vlan 1 port 2
set vlan 1 port 3
set vlan 1 port 4
set vlan 1 port 5
set vlan 1 port 6
set vlan 1 port 7
set vlan 1 port 8
set vlan 2 name corp
set interface 1 ip 10.45.100.20 255.255.255.0
set interface 2 ip 10.9.0.177 255.255.255.0
========= show ntp =========
NTP client: disabled
Current update-interval: 64(seconds)
Current time: Tue Oct 19 2010, 11:31:58
Timezone is set to 'CET', offset from UTC is 2:0 hours.
No previous NTP updates
NTP Server Peer state Local State
---------------------------------------------------
========= show ip https =========
HTTPS is disabled
HTTPS is set to use port 443
Last 0 Connections:
IP Address Last Connected Last Activity (s) User Secure
--------------- ----------------------- ----------------- ---------- ------
========= show snmp status =========
SNMP Status
SNMP agent (server snmpd) is disabled
SNMPv1 is enabled
SNMPv2c is disabled
SNMPv3/USM is disabled
SNMP minimum security is unsecured
System IP address: 10.9.0.177
System name: MX-8
System location: -- not set --
System contact: -- not set --
SNMP engine ID: 000038bd000000a10a0900b1 (IP 10.9.0.177:161)
SNMP engine boots: 50
SNMP engine time: 90 seconds, which is 0 days, 0 hr, 1 min, 30 sec
SNMP max message size: 2048 octets
========= show port status =========
Port Name Admin Oper Config Actual Type Media
================================================================================
1 up up auto 100/full network 10/100BaseTx
2 up down auto network 10/100BaseTx
3 up down auto network 10/100BaseTx
4 up down auto network 10/100BaseTx
5 up down auto network 10/100BaseTx
6 up down auto network 10/100BaseTx
7 up up auto 100/full network 10/100BaseTx
8 up down auto network 10/100BaseTx
========= show vlan =========
Admin VLAN Tunl Port
VLAN Name Status State Affin Port Tag State
---- ---------------- ------ ----- ----- ---------------- ----- -----
1 default Up Up 5
1 none Up
2 none Down
3 none Down
4 none Down
5 none Down
6 none Down
7 none Up
8 none Down
2 corp Up Down 5
Unassigned network ports: (none)
========= show interface =========
* = From DHCP
VLAN Name Address Mask Enabled State RIB
---- --------------- ---------------- --------------- ------- ----- -----------
1 default 10.45.100.20 255.255.255.0 YES Up ipv4
2 corp 10.9.0.177 255.255.255.0 YES Down ipv4
========= show arp =========
ARP aging time: 1200 seconds
Host HW Address VLAN State Type
------------------------------ ----------------- ----- -------- -------
10.45.100.20 00:0b:0e:31:0a:37 1 RESOLVED LOCAL
========= show fdb =========
* = Static Entry. + = Permanent Entry. # = System Entry. $ = Authenticated Entry
VLAN TAG Dest MAC/Route Des [CoS] Destination Ports or Tunnels
---- ---- ------------------ ----- ----------------------------
1 0 00:0b:0e:31:0a:37 # CPU
1 0 00:0b:0e:42:6e:c0 1
2 0 00:0b:0e:31:0a:37 # CPU
Total Matching FDB Entries Displayed = 3
dynamic= 1, static= 0, permanent= 0, system= 2, authenticated= 0
========= show mobility-domain =========
Mobility Domain name: default
Member State Type (*:active) Model Version
--------------- ------------- --------------- -------- ----------
10.9.0.177 STATE_UP SEED* MX-8 6.0.3.2
========= show network-domain =========
Peer State
--------------- -------------
========= show tunnel =========
VLAN Local Address Remote Address State Port LVID RVID
---------------- --------------- --------------- ------- ----- ----- -----
========= show roaming vlan =========
VLAN Switch IP Address Affinity
---------------- --------------- --------
default 10.9.0.177 5
========= show ap status terse =========
========= show ap unconfigured =========
========= show vlan-profile =========
VLAN profile: default
AP list: (none)
VLAN Name Tag
---------------- ----
default none
========= show sessions mesh-ap verbose =========
Mesh Sess IP or MAC Mesh-AP AP/
ID ID Address Number Radio
---------------------------- ---- ----------------- --------------- ---------
0 sessions match criteria (of 0 total)
========= show ap global =========
AP Serial Id SW IP Address Bias
--- ----------- --------------- ----
No aps matched.
========= show ap connection =========
========= show ap status all =========
========= show crypto key domain =========
Domain public key:
c3:87:c5:49:27:c4:35:60:3f:53:ce:15:90:75:b2:bf
========= show crypto certificate admin =========
Certificate:
Version: 3
Serial Number: 1001 (0x3e9)
Subject: C=DK, ST=Zealand, L=Noerrebro, O=Parknet, OU=Testunit, CN=zakulanx6125
Signature Algorithm: md5WithRSAEncryption
Issuer: C=DK, ST=Zealand, L=Noerrebro, O=Parknet, OU=Testunit, CN=zakulanx6125
Validity:
Not Before: Oct 11 13:37:55 2010 GMT
Not After : Oct 18 07:37:55 2013 GMT
========= show crypto ca-certificate admin =========
error: 'no such file' returned from get CA certificate request
========= show crypto certificate eap =========
Certificate:
Version: 3
Serial Number: 999 (0x3e7)
Subject: CN=eap.auto.configed.certificate,
Signature Algorithm: md5WithRSAEncryption
Issuer: CN=eap.auto.configed.certificate,
Validity:
Not Before: Jan 7 12:03:15 2007 GMT
Not After : Jan 14 06:03:15 2010 GMT
========= show crypto ca-certificate eap =========
error: 'no such file' returned from get CA certificate request
========= show crypto certificate web =========
Certificate:
Version: 3
Serial Number: 999 (0x3e7)
Subject: CN=web.auto.configed.certificate,
Signature Algorithm: md5WithRSAEncryption
Issuer: CN=web.auto.configed.certificate,
Validity:
Not Before: Jan 7 12:03:19 2007 GMT
Not After : Jan 14 06:03:19 2010 GMT
========= show crypto ca-certificate web =========
error: 'no such file' returned from get CA certificate request
========= dir =========
================================================================================
file:
Filename Size Created
file:backup 35 KB Feb 03 2007, 17:52:28
file:command_audit.cur 1904 bytes Oct 13 2010, 16:06:28
file:configuration 25 KB Oct 12 2010, 11:35:30
file:configuration.bak.5.0 35 KB Feb 03 2007, 17:52:28
fileld_configuration 48 KB Jul 04 2007, 18:26:56
file:qs_template.xml 16 KB Jul 02 2007, 00:21:30
================================================================================
Boot:
Filename Size Created
boot0:MX060002.008 8093 KB Feb 03 2007, 17:54:48
*boot1:MX050701.008 8845 KB Jul 02 2007, 00:49:26
================================================================================
System Total: 17 Meg used, 12624 Kbytes free
================================================================================
temporary files:
Filename Size Created
core:build_details 388 bytes Oct 19 2010, 11:29:58
core:command_audit.cur 37 bytes Oct 19 2010, 11:30:06
Total: 425 bytes used
This is my first post here and it regards problem with connection between my TRAPEZE MX-8 and RingMaster software v.7.1
I have full access to the MX-8 console trough the serial connection. Enable mode is ON.
Problem is that RingMaster can not list my MX-8 in list of available devices for the mobility domain that I'm trying to configure. Any help is highly appriciated.
In order to provide some basic information on current config settings, I list tech system details below:
========= show system details =========
================================================================================
Product Name: MX-8
System Name: MX-8
System Country Code: DK
System Location:
System Contact:
System IP Address: 10.9.0.177
System Idle Timeout
System MAC: 00:0B:0E:31:0A:37
================================================================================
Boot Time: 2010-10-19 11:29:59
Uptime: 0 days 00:01:59
================================================================================
Fan Status: Fan1 OK Fan2 OK
PSU Status: Power Supply AC OK DC OK.
Memory [MB]: 62.02/128.00 (48%)
Total PoE Draw [W]: 2.726
================================================================================
Alternate DoC Format
================================================================================
========= show license =========
Serial Number : 0620200064
12 ports are enabled
Additional Features:
Mesh Service : 0
========= show version details =========
Mobility System Software, Version: 6.0.3.2 REL
Copyright (c) 2002 - 2007 Trapeze Networks, Inc. All rights reserved.
Build Information: (build#0) REL_6_0_3_branch 2007-06-22 16:55:00
Label: REL_6.0.3.2.0_062207
Build Suffix: -d-O1
Model: MX-8
Hardware
Mainboard: version 1 ; revision K ; FPGA version 8
CPU Model: 405EP (Revision 9.80)
Serial number 0620200064
Flash: 1.0.0 - 0
Kernel: QNX-630
BootLoader: 4.3 / 6.0.7
AP AP Model Serial # Versions
----- ------------ -------------- ------------------------
========= show boot =========
Configured boot version: 6.0.3.2.0
Configured boot image: boot1:MX050701.008
Configured boot configuration: file:configuration
Backup boot configuration: NONE
Booted version: 6.0.3.2.0
Booted image: boot1:MX050701.008
Booted configuration: file:configuration
Product model: MX-8
========= show configuration =========
# Configuration nvgen'd at 2010-10-19 11:31:58
# Image 6.0.3.2.0
# Model MX-8
# Last change occurred at 2010-10-19 11:30:23
set ip route default 10.45.100.1 1
set ip route default 10.9.0.1 1
set system name MX-8
set system ip-address 10.9.0.177
set system countrycode DK
set timezone CET 2 0
set service-profile Open ssid-name parknet
set service-profile Open auth-fallthru last-resort
set service-profile Open wpa-ie enable
set service-profile Open rsn-ie enable
set service-profile Open cipher-tkip disable
set service-profile Open cipher-ccmp enable
set service-profile Open psk-raw 9358c3267c9f99645b35dcf37107972839afab7258ee187541965e405e88da63
set service-profile Open auth-psk enable
set service-profile Open auth-dot1x disable
set service-profile Open attr vlan-name default
set enablepass password 08b5e61e349f753a79af65572914740c49e9
set user admin password encrypted 070e25414707
set radio-profile default service-profile Open
set ap 1 serial-id 0771100392 model MP-422
set ap 1 radio 1 channel 1 tx-power 3 mode enable
set ap 1 radio 2 tx-power 3 mode enable
set port poe 1 enable
set vlan 1 port 1
set vlan 1 port 2
set vlan 1 port 3
set vlan 1 port 4
set vlan 1 port 5
set vlan 1 port 6
set vlan 1 port 7
set vlan 1 port 8
set vlan 2 name corp
set interface 1 ip 10.45.100.20 255.255.255.0
set interface 2 ip 10.9.0.177 255.255.255.0
========= show ntp =========
NTP client: disabled
Current update-interval: 64(seconds)
Current time: Tue Oct 19 2010, 11:31:58
Timezone is set to 'CET', offset from UTC is 2:0 hours.
No previous NTP updates
NTP Server Peer state Local State
---------------------------------------------------
========= show ip https =========
HTTPS is disabled
HTTPS is set to use port 443
Last 0 Connections:
IP Address Last Connected Last Activity (s) User Secure
--------------- ----------------------- ----------------- ---------- ------
========= show snmp status =========
SNMP Status
SNMP agent (server snmpd) is disabled
SNMPv1 is enabled
SNMPv2c is disabled
SNMPv3/USM is disabled
SNMP minimum security is unsecured
System IP address: 10.9.0.177
System name: MX-8
System location: -- not set --
System contact: -- not set --
SNMP engine ID: 000038bd000000a10a0900b1 (IP 10.9.0.177:161)
SNMP engine boots: 50
SNMP engine time: 90 seconds, which is 0 days, 0 hr, 1 min, 30 sec
SNMP max message size: 2048 octets
========= show port status =========
Port Name Admin Oper Config Actual Type Media
================================================================================
1 up up auto 100/full network 10/100BaseTx
2 up down auto network 10/100BaseTx
3 up down auto network 10/100BaseTx
4 up down auto network 10/100BaseTx
5 up down auto network 10/100BaseTx
6 up down auto network 10/100BaseTx
7 up up auto 100/full network 10/100BaseTx
8 up down auto network 10/100BaseTx
========= show vlan =========
Admin VLAN Tunl Port
VLAN Name Status State Affin Port Tag State
---- ---------------- ------ ----- ----- ---------------- ----- -----
1 default Up Up 5
1 none Up
2 none Down
3 none Down
4 none Down
5 none Down
6 none Down
7 none Up
8 none Down
2 corp Up Down 5
Unassigned network ports: (none)
========= show interface =========
* = From DHCP
VLAN Name Address Mask Enabled State RIB
---- --------------- ---------------- --------------- ------- ----- -----------
1 default 10.45.100.20 255.255.255.0 YES Up ipv4
2 corp 10.9.0.177 255.255.255.0 YES Down ipv4
========= show arp =========
ARP aging time: 1200 seconds
Host HW Address VLAN State Type
------------------------------ ----------------- ----- -------- -------
10.45.100.20 00:0b:0e:31:0a:37 1 RESOLVED LOCAL
========= show fdb =========
* = Static Entry. + = Permanent Entry. # = System Entry. $ = Authenticated Entry
VLAN TAG Dest MAC/Route Des [CoS] Destination Ports or Tunnels
---- ---- ------------------ ----- ----------------------------
1 0 00:0b:0e:31:0a:37 # CPU
1 0 00:0b:0e:42:6e:c0 1
2 0 00:0b:0e:31:0a:37 # CPU
Total Matching FDB Entries Displayed = 3
dynamic= 1, static= 0, permanent= 0, system= 2, authenticated= 0
========= show mobility-domain =========
Mobility Domain name: default
Member State Type (*:active) Model Version
--------------- ------------- --------------- -------- ----------
10.9.0.177 STATE_UP SEED* MX-8 6.0.3.2
========= show network-domain =========
Peer State
--------------- -------------
========= show tunnel =========
VLAN Local Address Remote Address State Port LVID RVID
---------------- --------------- --------------- ------- ----- ----- -----
========= show roaming vlan =========
VLAN Switch IP Address Affinity
---------------- --------------- --------
default 10.9.0.177 5
========= show ap status terse =========
========= show ap unconfigured =========
========= show vlan-profile =========
VLAN profile: default
AP list: (none)
VLAN Name Tag
---------------- ----
default none
========= show sessions mesh-ap verbose =========
Mesh Sess IP or MAC Mesh-AP AP/
ID ID Address Number Radio
---------------------------- ---- ----------------- --------------- ---------
0 sessions match criteria (of 0 total)
========= show ap global =========
AP Serial Id SW IP Address Bias
--- ----------- --------------- ----
No aps matched.
========= show ap connection =========
========= show ap status all =========
========= show crypto key domain =========
Domain public key:
c3:87:c5:49:27:c4:35:60:3f:53:ce:15:90:75:b2:bf
========= show crypto certificate admin =========
Certificate:
Version: 3
Serial Number: 1001 (0x3e9)
Subject: C=DK, ST=Zealand, L=Noerrebro, O=Parknet, OU=Testunit, CN=zakulanx6125
Signature Algorithm: md5WithRSAEncryption
Issuer: C=DK, ST=Zealand, L=Noerrebro, O=Parknet, OU=Testunit, CN=zakulanx6125
Validity:
Not Before: Oct 11 13:37:55 2010 GMT
Not After : Oct 18 07:37:55 2013 GMT
========= show crypto ca-certificate admin =========
error: 'no such file' returned from get CA certificate request
========= show crypto certificate eap =========
Certificate:
Version: 3
Serial Number: 999 (0x3e7)
Subject: CN=eap.auto.configed.certificate,
Signature Algorithm: md5WithRSAEncryption
Issuer: CN=eap.auto.configed.certificate,
Validity:
Not Before: Jan 7 12:03:15 2007 GMT
Not After : Jan 14 06:03:15 2010 GMT
========= show crypto ca-certificate eap =========
error: 'no such file' returned from get CA certificate request
========= show crypto certificate web =========
Certificate:
Version: 3
Serial Number: 999 (0x3e7)
Subject: CN=web.auto.configed.certificate,
Signature Algorithm: md5WithRSAEncryption
Issuer: CN=web.auto.configed.certificate,
Validity:
Not Before: Jan 7 12:03:19 2007 GMT
Not After : Jan 14 06:03:19 2010 GMT
========= show crypto ca-certificate web =========
error: 'no such file' returned from get CA certificate request
========= dir =========
================================================================================
file:
Filename Size Created
file:backup 35 KB Feb 03 2007, 17:52:28
file:command_audit.cur 1904 bytes Oct 13 2010, 16:06:28
file:configuration 25 KB Oct 12 2010, 11:35:30
file:configuration.bak.5.0 35 KB Feb 03 2007, 17:52:28
fileld_configuration 48 KB Jul 04 2007, 18:26:56
file:qs_template.xml 16 KB Jul 02 2007, 00:21:30
================================================================================
Boot:
Filename Size Created
boot0:MX060002.008 8093 KB Feb 03 2007, 17:54:48
*boot1:MX050701.008 8845 KB Jul 02 2007, 00:49:26
================================================================================
System Total: 17 Meg used, 12624 Kbytes free
================================================================================
temporary files:
Filename Size Created
core:build_details 388 bytes Oct 19 2010, 11:29:58
core:command_audit.cur 37 bytes Oct 19 2010, 11:30:06
Total: 425 bytes used