Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

need 24 and 48 port midspan power injectors

Status
Not open for further replies.

Dangigem

Programmer
Aug 14, 2003
38
US
any recommendations for 24 and 48 port midspan power injectors 802.3af for a mixture of 5610sw, 5621sw and 9640 ip phones. I have never had an installation that required the aforementioned devices, so I am not familiar with which ones to stay away from.

Thanks
Danny Rich
 
I would honestly use 2x24s over a 48 unless the 48 is 2U. The 1u 48 port ones we used had the incoming ports in a little open spot in the middle so once any device was installed above it you could not trace or replace wires.
I used 700409717 24 port and 70041253 48 port and both are fully powered with no problems. They are just avaya branded power d-sine.

 
You might need to compare the price to a HP or other POE swtich.

A midspan might cost the same, or even more.

Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________
 
isnt Zyxel selling PoE switches for Wall Mart prices these days?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top