I programmed the LEN to use an extension. I programmed the mac to be associated with the LEN. When I boot the phone, it comes up asking for a login and password. The login name is supposed to be the LEN, but I have no idea what the password is. I assume it is programmed in the PBX somewhere. Ideas??
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NEC2400 w/ itr-16d phones
- Thread starter CBuryMatt
- Start date
If all else is programmed correctly then the login ID is the extension number and the password is also the extension number.
If you assign a password in ADTM and then use the ADTM password then the MAC address will automatically be written in AMAC.
If you assign a password in ADTM and then use the ADTM password then the MAC address will automatically be written in AMAC.
- Thread starter
- #3
- Status
Similar threads
