NEC2100 Voiceflex SIP Line Dropping

[Wesley Hay]

Hi Guys and Girls

Very new to NEC, been installing Panasonic for 20 years.

I'm messing about with our promo NEC2100 kit, i've got the voiceflex sips to work incoming/outgoing but the are unregistering after a short time.

I'm scratching my head, i'm installing 2100 on wednesday with sips and i'm struggling to be honest.

Thanks
Wes

 

[CoralTech]

Probably UDP timeout on your router is dropping the connection. You need to adjust settings one way or the other. Make sure SIP ALG is off.

 

[Wesley Hay]

Thanks for your reply @coralTech.

SIP ALG is off. and i've checked the UDP timer on the draytek.

Dont suppose you have a cheat sheet for setting up SIP trunks on an SL2100? so i can check if ive missed something.

Waiting for a course to come up, currently only offering 9100 course.

Thanks
Wes

 

[CoralTech]

Set the timer high. Whitesheets should be avail on ntac or necanytime.

 

[OzzieGeorge]

Do the 9100 course, the programming is pretty much the same. It will give you something to work with till the 2100 course becomes available.

 

[daddybadger]

84-35-39 I think. Change that from 0 to 1. Should be sip customisation message. Are you using authentication method or username and password? I use voiceflex on the sl2100 and don't have any issues.