NEC Univerge NEAX IPS DM - set phone to ring

[Kahod]

NEC Univerge NEAX IPS DM phone system has several phone stations set to ring when someone calls. I have been tasked to set another station to ring. I have logged into Matworx and have looked at the stations that are already set to ring, and have compared it to the station that I need to set to ring, and can't figure it out. I could really use some help. Thanks in advance.

 

[Kahod]

If there are any NEC techs available to remote into this system, I'm willing to pay someone. The sooner it is done the better. I have an old XP laptop connected to it with Matworx already installed, that I can give you remote access to knock it out.

 

[belevedere]

Check CMD 9001 by button for ring assignment.
MOC mode, 9001>EXT,YY>0 = no ring, 1 = ring
EX: CO 1, or a virtual extension appears on button 1 for ext 200;
9001>200,01:1 = ring
To modify, 9001>200,01:0 -> 1, EXE

 

[Kahod]

Thanks Belvedere, but I'm not familiar at all with using Matworx on the command line side to know what to do with this. I've used it to update station user names and the time, that's about it. I'd be willing to pay you to remote into the system to get it going, if you're interested.

 

[belevedere]

Try connecting to the system, click on the station option at the top, type in the extension number, click on the key data tab, then I believe you can set your mouse pointer on the button and set the ring to always, or delayed.

 

[Kahod]

I'll try it Monday when I go back in. Thanks for your help.

 

[OzzieGeorge]

Where in OZ are you?

 

[Roo Richards]

I just learnt something, always had to go to CMD> 9001 to do that!