NEC SV9100 System RTP Packet capturing using biltin Packet capture

[bk Patel]

Hello All

if i packet capture using Port triggering i am received RTP Packet and Flow sequence But i using inbuilt Packet capture In SV9100 System i Not receive RTP Packet and Flow sequence.

i want RTP Packet and Flow sequence using inbuilt Packet capture feature.
if any have Idea Please Suggest .

thanks.

 

[OzzieGeorge]

You should always get this, the built in packet capture is normally opened using wire shark and that allows you to view the telephony streams and the RTP streams!

 

[bk Patel]

thabks For reply

here attached file which is downloaded from SV9100().
not sheen any RTP stream in the file .

 

[OzzieGeorge]

Agreed, there is no RTP in that file. did any conversation take place? Have you got a valid IP address in 84-26?

 

[DisplayName]

In built packet capture only does signalling. It won’t do rtp.
Limitation of the inbuilt capture tool.

 

[Fodrod]

The PBX doesn't have enough storage to store the RTP, so if you need the RTP, you need to do a full port monitoring with a separate machine.

 

[Rikman]

Fodrod is right, the SL2100 is that way also, RTP is not provided on Incapture.