NEC SV9100 - Multiline Client (Smartphone App)

[irongladiator]

Hello Fellow Tek-Tips Techs,
I was wondering if anyone here has a quick guide on how to go about setting up a user with the MLC (Multiline Client) app. Specifically on the SV9100 side. I'm a current NEC SV8100/SV9100 Cert'd tech but for the life of me cannot seem to find a guide on NEC NTAC's site. I found a couple guides on how to install and setup on the end users smart phone but nothing on the SV9100 side of things.

Thanks,
-iron

 

[belevedere]

You can find it in the features and specs manual.

 

[irongladiator]

Hi belevedere,
Thanks for the reply! I've seen the Feature and Specs manual and even though it doesn't walk you through a step by step process, it looks very similar in setting up a physical IP phone. My question would then be after setting it up, in the app it looks like under activation it is asking for a "Site Tag/Hardware Key Code". I'm familiar with the Hardware Key Code, but am curious as to the site tag. is it wanting both? if so, how is it entered?

Thanks,
-iron

 

[belevedere]

The MLC licenses are retained in NEC's portal. Unfortunately they cannot be re-assigned without a dealer submitted form. In any case, there needs to be a MLC license in the portal. I attached a MLC user guide. See chapter 7 for details. Note p 7-4 in the note at the bottom.