Hi,
I am a new to NEC SV9100. I managed to setup the extensions starting with console extension no. 200, 201,203, that range upto to 20 extensions and working ok.
My challenge is configuring the ISDN Line so as the system can be able to receive calls and to make calls through the extensions.Below is the email have received from the ISDN telco in kampala,Uganda,
E1 set up
Framing structure Double framing or CRC-4
Line coding HDB3
Interface port type: E1 (European standard)
Signaling timeslot : CH 16
Number of channels : 15
Network
Routing DID : 7 digits ( configure to receive 7101100 as example)
CLI : Seven digits ( Send 7101100 as A-number)
Kindly guys help me out.
I am a new to NEC SV9100. I managed to setup the extensions starting with console extension no. 200, 201,203, that range upto to 20 extensions and working ok.
My challenge is configuring the ISDN Line so as the system can be able to receive calls and to make calls through the extensions.Below is the email have received from the ISDN telco in kampala,Uganda,
E1 set up
Framing structure Double framing or CRC-4
Line coding HDB3
Interface port type: E1 (European standard)
Signaling timeslot : CH 16
Number of channels : 15
Network
Routing DID : 7 digits ( configure to receive 7101100 as example)
CLI : Seven digits ( Send 7101100 as A-number)
Kindly guys help me out.