NEC SV9100 is connected with SIP gateway,sip gateway fxs port is not can doing conference 1

[bk Patel]

i have NEC SV9100 connected with FXS gateway ,all port is registered and voice communication working fine olso other service code working fine like ( call forwording , call picup , call transfur ) but conference not working.
please suggest if have any idea ,wht can i do for conference .

 

[OzzieGeorge]

You would use the procedure for single line telephones, as follows....

Single Line Telephone
1. Establish Intercom or trunk call.
2. Hookflash and dial #1.
3. Dial extension you want to add.
- OR -
Access trunk call.
- OR -
Retrieve call from Park orbit.
4. Hookflash and repeat step 3 to add more parties.
- OR -
Hookflash twice to set up the Conference.

The only issue you may have is if the dial plan in the gateway doesn't accommodate the # codes and hook flash (sometimes referred to as recall)

 

[bk Patel]

thanks
@ OzzieGeorge

i am doing as per your instruction,
but still conference can not do by FSX port, i also check in SIP gateway but in no any Feature Code option available for conference.
My dial plan type is sent to server
[*#]T|[*#][*#]|*x.T|**x.#|[*#]xx#|*#xx#|[*#][0-9*#]x[0-9*].x#|x.#|x.T