We are going to be upgrading our 2400 to an SV8500 in the next few months or so which is no problem, but we also have a CUCM that we will be phasing out with roughly 350 users on. I was wondering, to save money, if we could use our 7900 series Cisco phones on the SV8500.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NEC SV8500 with 7900 series phones?
- Thread starter dgrahamiv
- Start date
Are the 7900 phones just standard SIP phones? If so, the SV8500 is capable of running 3rd party SIP phones. You need to have Standard SIP license purchased and installed for each one of those phones. This is different from the SIP endpoint licenses neeeded to run the DT700 NEC SIP phones, but nevertheless, works.
- Status
Similar threads
- Locked
- Question
