NEC SV8100

[techjohnny]

I would like to add a static route under 10-45 for the network 192.168.2.0/24 to route to 192.168.1.93 (The NEC's LAN) and the 192.168.2.0 the other VOIP network.

I added the entry as 192.168.2.0 mask 255.255.255.0 gw 192.168.1.93, but not sure if it's working properly. After applying, do I need to reboot the phone system, and can I check the routing table through the telnet/putty diag port?

--jp

 

[Ebeau9797]

Any IP change needs a reboot.

 

[PFD45]

It's been my experience that whenever I change an IP address in an 8100 I need to upload the changes and then close my PCPro session.
Only after I exit the app does it write to it's database.
Then you'll need to re-start the box.