NEC SV8100 SIP

[sivasunil1000]

Hello,

We are using NEC SV8100, we have configured the SIP trunks and its working fine, now i have a requirement to use the Softphones from out side of our network.

- IP Address 192.168.0.10
02 - Subnet Mask 255.255.255.0
03 - Default Gateway 193.168.0.1
05 - NIC Setting Automatic detection
06 - NAPT Router
07 - NAPT Router IP Address X.X.X.X (SIP trunk provider ip address)
08 - ICMP Redirect
09 - IPL IP Address 193.168.0.20
10 - IPL Subnet Mask 255.255.255.0
11 - IPL NIC Setting Automatic detection
13 - DNS Primary Address 4.2.2.2
14 - DNS Secondary Address 8.8.8.8
15 - DNS Port 53

I have kept A.B.C.D IP address port forwarding to 193.168.0.20 IP address and trying to configure softphone with A.B.C.D IP address and port number, its not getting register

Please help.

 

[Daniel_RO]

Are you trying to use the univerge ST450 or ST500 mobile app? or a third party app?

On your port forwarding, you will obviously need 5060-5080 port forwarded for registration (5060 for your SIP Trunks, 5080 for the Univerge App/Third Party App), and also 10020-10531 for DSP Channels to your 84-26 IP Address.

If you are using third party, sometimes they have a domain, and a server field. One of them requires the port on it, the other doesnt.

Just a few things to test. But by default, an 8100 uses either 5070 or 5080 as a registration port.