NEC sl1000 Individual trunk access code

[Zero6]

Hi all,

I want to use the Individual trunk access code 6, so it can dial from a specific port.
I have setup the numbering plan 11-01 to individual trunk, but don't know what else is missing.
Might someone have an idea?
Also when I press 9 for dialing out, that works, so no issues there.

Thank you in advance

 

[belevedere]

Look at MB 11-09-02. Place the 6 there and in 11-01 set 6 up as trunk access.

 

[Zero6]

Hi Belevedere,

I have done this, but still doesn't work

 

[belevedere]

Does #0 + 001 give you trunk 1? #0 is the direct trunk select code in the SL1000. MB 11-10-15