splnimalarathna
Technical User
Dear all
how to programming sip trunk calling party numbers (100 numbers)
how to programming sip trunk calling party numbers (100 numbers)
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
nec sl1000 calling party number 3
- Thread starter splnimalarathna
- Start date
- Status
belevedere
Instructor
MB 21-17 for each trunk, 21-19 for each station (overrides trunk setting).
- Thread starter
- #3
splnimalarathna
Technical User
Dear Friend thanks for you
I programmed 21-19 but it not visible to out side party. After that I programmed 10-36 user id. Its visible.But can't programmed 100 numbers only 32 numbers.What to do?
I programmed 21-19 but it not visible to out side party. After that I programmed 10-36 user id. Its visible.But can't programmed 100 numbers only 32 numbers.What to do?
-
2
- #4
-
1
- #5
belevedere
Instructor
Make sure 20-08-13 ISDN CLIP is checked. Then go back to 21-19
- Thread starter
- #6
splnimalarathna
Technical User
Dear Ragnorak
Thank you so much my problem is short out
Thank you so much my problem is short out
- Status
