I am trying to get an NEC Promail & a Level I to work together. I can call into and set up the promail from an internal extension but cannot get into or transfer to the promail from an outside line. I have the promail extensions in the same COS as the rest of the phones, I have them set as "DP" in 4-05, the message waiting lights work and I can't figure out why there's no access to CO's. Is there a technician password other than the system manager password like in the AV lingo? I am at a loss. I also only have the System Admin Guide and am not sure if the Promail has an installation guide. Any help would be greatly appreciated. Thanks in advance!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NEC Promail & Epro Level I 1
- Thread starter KJPMaine
- Start date
-
1
- #2
Check these mem blocks: 1-34=hold, 1-35=pilot number 50 yes, 1-49=no, 1-64=hangup, 1-67 codes 01=81,02=82, 03=83, 04=84, 05=85, 06=86, 07=87, 08=88, 10=641, 11=642, in mem block 1-68=1sec, 1-69=100/700ms, 4-01=yes for vm ports, 4-05=DP, 4-06=50+51, 4-07=yes. Then make lines ring in 4-15, 4-16.
- Status
