Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NEC NEAX IPS2000 Troubleshooting

Status
Not open for further replies.

herestone

IS-IT--Management
Jun 15, 2021
44
PH
Hi All,

Can someone help me with my concerns on NEC NEAX IPS2000?

Actually, our client has 3 PIMs Named PIM 0 PIM 1, and PIM 2 . They have a problem with the PIM 2 (all Analog Local) Status of the LED cards are all blinking-PIM 0 and PIM 2 are working fine. I checked the programming and thought that the local assignment disappear but all local programming all are set. Please help me what are the possible cause that the PIM 1 is down all no dial tone. Is it possible that the power supply is defective or any suggestion what would i Checked to Isolate the problem?

Thank you ..
 
Check the PSU voltages. Push the + meter probe into the back of the power supply plug at the back left of the PIM, and the - probe to ground. You should get -5 vdc and -27 vdc.
 
Its the PSU. I have had that happen many a time. Replace it



There are 10 kinds of people in the World.

Those that understand Binary and those that don't.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top