NEC NEAX 2400 feature button programming

[jraykc]

Does anyone know how to program feature buttons on Dterm phones from the MAT software instead of manually on each phone.

Specifically:
1. Need buttons to forward callers to their cell.
2. Need buttons for speed dial.

Thanks.

 

[OzzieGeorge]

First each station has to be assigned it's own memory blocks command 73 then in command 9000 you can assign the slots using F11XX where XX= the slot in the block then in Command 74 you can programme specific numbers into the slots. If you want a button which forwards all calls to the users mobile simply programme in the feature code for call forward all followed by the line access code then a comma then the mobile number. That slot will then when used forward the phone to the mobile.

 

[belevedere]

Your post lists the question for the NEC 2400. Ozzie's response is for the NEC 2000. Which system are you working with?

 

[jraykc]

NEAX 2400 and we're using the MAT software, version R17 2.11.

Thanks.

 

[OzzieGeorge]

Whoops

Sorry! Not concentrating!

 

[OzzieGeorge]

Akyd is the command to assign key values. KYI is 1 and if I remember rightly 49 is the value for a system speed dial but unfortunately as the memories are held on the card you have to programme the speed dials individually from the phone.

 

[MercuryComm]

I'm thinking Ozzie was just trying to play an April fools joke on us!!

 

[OzzieGeorge]

Moi!!!!

Never :-(