Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NEC Mark ii

Status
Not open for further replies.

Thomas VIII

Programmer
Jun 18, 2018
26
0
0
US
I have a system with a bad ECR-E card. I am having a hard time trying to find another one. Does anyone have any suggestions?
I am trying to get a night ringer going. I though of using a SLI card and program the analog port to ring in night mode but I found
out you cannot program the single line ports to ring day/night. By default it rings both and you can't change it.
 
True, however, we used to tap into the speaker leads of a sacrafcial multiline phone and connect it to a paging amp. So, you can open up a cheap 6 button non display phone, cut the speaker leads and bring them to a small paging amp. Then program up the night mode ringing. Or, replace the system. The NEC SL2100 is very versatile, inexpensive and feature rich.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top