Direct Privacy release does'nt work correctly. Analog line used as modem for PC dailing appearing on D-term phone can't be accessed gets fast busy. I can access other appearances of digital ext. just not analog. Executive overide works OK but the Features & Specs manual says Direct Privacy release should work with a analog line for PC dialing. What is up with this. Class of service is the same for digital and analog lines 1515. Thanks for your Help!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NEC IVS 2000 Direct Privacy Release & Analog Ext. Does'nt Work 1
- Thread starter A1832A
- Start date
-
1
- #2
CM 1205 for the single line station m ust be set to a 0. Also the modem line will not be able to be accessed until there is answer supervision on the outgoing call.
So if you are using the modem to dial out a number from an address book make sure you have the speakers turned up on the PC cause you will not be able to access the off hook single line appearance until the dialed number answers in most cases.
So if you are using the modem to dial out a number from an address book make sure you have the speakers turned up on the PC cause you will not be able to access the off hook single line appearance until the dialed number answers in most cases.
- Status
