Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NEC IPK II Converting Analog Trunk to PRI

Status
Not open for further replies.

YnotPhone

Programmer
Jan 16, 2006
371
CA
Greetings all,
I am new to this system.
I come from the Mitel, Avaya, CS1000, Cisco world.

NEC IPK II conversion from analog trunks to full PRI.
Does someone happen to have a checklist for this type of conversion?
 
Greetings all,

So it seems that I had all the programming in place, I was having errors logging from my system, according to the Telco.
I just wanted a check list to see if I made a mistake in the programming, but it seems that on the back plane of the pair gain (HRU) unit was causing all sorts of issues. The cct was testing clean till I placed a hard loop back on the pair gain connection on the back of unit.
PRI monitors saw errors without my equipment installed on the line.

Got the Telco provider to change the pair gain unit, hoping that makes a difference.

Thought I would let this site know of my findings.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top