Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

nec elite memory batteries

Status
Not open for further replies.

telpro

Technical User
Oct 11, 2003
36
US
I need a source for the 3.6volt 60maH nicad with connector used on the elite 48 for memeory backup. I have found lots of 3.6/60 batteries but not with the plug. I dont want to reuse the old plug. Also, has anyone experienced problems with replacement cpu batteries on the pro II? thanks!
 
I have tried KPLAN already. I am not an authorized dealer so I havnt tried NEC..
 
I have a couple of techs that remove the leads with solder iron then solder back on new battery. It takes them all of 10 min. CHECK YOUR POLARITY.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top