NEC electra elite 48 private line

[bcmfiftyfan]

Hello I've got a ticket to add one non-hunting co to an Electra elite 48 and assign it as private to only one extension. I've found programing info on-line and the relevant memory blocks appear to be 1-1-29, 3-02, 3-05, 3-91, 3-92, 4-01, 4-12 and 4-19. Are there other areas/memory blocks that I may be overlooking or do I seem to be on the right track?
Thanks in advance.

 

[gbaughma]

Have it DIT into the extension (or onto a CO button), and put the line into a different tenant, so when someone picks up and dials "9", it won't snag that line.



Just my 2¢

"What the captain doesn't realize is that we've secretly replaced his Dilithium Crystals with new Folger's Crystals."

--Greg

http://parallel.tzo.com

 

[gbaughma]

Not tenant... my bad.... trunk group.



Just my 2¢

"What the captain doesn't realize is that we've secretly replaced his Dilithium Crystals with new Folger's Crystals."

--Greg

http://parallel.tzo.com

 

[gbaughma]

... so all you really need is 3-03 (Trunk to Trunk Group Assignment).... and program up that CO as a ringing button on that one extension.



Just my 2¢

"What the captain doesn't realize is that we've secretly replaced his Dilithium Crystals with new Folger's Crystals."

--Greg

http://parallel.tzo.com

 

[bcmfiftyfan]

Thanks G for the pointers. I forgot to mention that the customer has a square setup with 4 lines appearing on 10 phones. Tell me if this sounds right: first punch down line, then run program 3-92 to add the line to the system, then run 3-03 to assign trunk group, then run 4-12 to assign CO5 to a button on the desired extension, then run 4-01 to assign ringing to the desired extension.
I know this is elementary stuff for NEC technicians so thanks in advance for your patience and help.

 

[gbaughma]

That sounds right.


Just my 2¢

"What the captain doesn't realize is that we've secretly replaced his Dilithium Crystals with new Folger's Crystals."

--Greg

http://parallel.tzo.com