NEC DS1000 with Intramail - delayed ring on trunks AA

[daronwilson]

Installing a DS1000 with the built in intramail voice mail. We want the AA to answer when the switch is in night mode but want it to ring the extensions first for three 3 rings. Usually there is a 'delay before answer' on the AA setup for the trunks, but I don't see that in the DS1000. Am I going about this the wrong way?

Thanks!

Daron J. Wilson, RCDD
daron at wilson dot org

 

[ttech]

Striaght from the NEC site:

IntraMail
Feature:
Delayed IntraMail Answering at Night
Software:

3.03.00 or higher
Date:
10/21/03
Problem:
We are installing an IntraMail on a DS1000. We would like the IntraMail to answer only at night. Instead of having the Automated Attendant answer right away when the night button is activated, we would like a delayed answer to give anyone in the office a chance to answer the incoming call. Is this possible?
Solution:
In 1003-Day Termination, make sure each trunk is Key Ring (which is the default).

In 1003-Day Overflow, enter N.

In 1003-Night Termination, also make sure that each trunk is Key Ring.

In 1003-Night Overflow, enter Y

In 1003-Night Overflow destination, enter 700.

 

[ttech]

Daron

You if you are not using the PC program to program the system you should try it. It makes life Much easier

Don

 

[daronwilson]

Thanks, had thought of doing it that way. I've been out of the TIE/NITSUKO NEC frame of mind for a few years, last one I put in was a DS01 10 years ago.

Thanks for the tip, I'll get the software.



Daron J. Wilson, RCDD
daron at wilson dot org