Victor Rowett
Technical User
How would I default the ip address on an nec 9100 system using a digital phone?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NEC 9100 pbx
- Thread starter Victor Rowett
- Start date
- Status
OzzieGeorge
Programmer
If you have the password, it is fairly straightforward to change the IP address from a phone, just go into programming mode (spkr #*#*) enter the password and you can change pretty much anything you want. There are 2 possible IP addresses used to communicate with the outside world, they are in 10-12-01 and 10-12-09. Be very careful though if you change 10-12-09 it is the VoIP address and other equipment may be pointed to it. There is a third IP address that would need checking if you do change the VoIP address, it is for the DSPs and is in 84-26-01.
- Status