mikeymac85
Technical User
Does the NEC 8300 have the ability to detect D-channel failure? If so, any doc on how to provision this so when the D-channel is down, calls can re-route to another PRI or POTs lines.
Thanks.
Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NEC 8300 - can it detect D-channel failure
- Thread starter mikeymac85
- Start date
- Status
OzzieGeorge
Programmer
Without checking, I'm pretty sure it does and if LCR is used, it will simply step over to the next option if there is one!
- Thread starter
- #3
mikeymac85
Technical User
Do you know if there is any additional license necessary to see D-channel failure or a configuration option to enable it?
belevedere
Instructor
D-channel failure overflow is automatic when using LCR. You can observe the status of the PRI and D-channel using PCPro. There is no license necessary for this.
- Status
