Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NEC 8100 COT card question

Status
Not open for further replies.
Zero6

Zero6

Technical User
Joined
Oct 20, 2016
Messages
309
Location
CW
Hi all,

A question, on the nec 8100 COT card, each port can support 4 pstn lines correct, using the rj45 connector and splitting the utp wires in 4 pairs

 
Sort by date Sort by votes
Hi 3racefan3

Thanks for confirming this.
 
Upvote 0 Downvote
Hi just a bit of a clarification here. Normal UTP connections are RJ45 plugs (8P8C) but not an RJ format, they are configured for data connections (can't remember the standard). NEC use RJ61 which is the same 8P8C plug but configured differently (4a,3a,2a,1a,1b.2b.3b.4b) so if you use a preconfigured lead, you will have to have lines 3 and 4 on split pairs.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

B
  • Question Question
NEC Standard SIP
Replies
9
Views
756
Rafi415
R
F
  • Locked
  • Question Question
Nec sl2100 problem
Replies
16
Views
1K
OzzieGeorge
OzzieGeorge
E
  • Locked
  • Question Question
NEC migration - DT900 firmware
Replies
2
Views
399
erikstiv
E
S
  • Locked
  • Question Question
NEC DT800 Firmware
Replies
3
Views
2K
PBXTrial
P
G
  • Question Question
NEC DT800 STD SIP Firmware
Replies
7
Views
524
Rafi415
R

Part and Inventory Search

Sponsor

Back
Top